Night vision assist control unit, component description - GF54.30-P-6200SX
MODEL 221.0/1, 216.3 with CODE (610) Night vision assist up to Model Year 8
Shown on model 221.0
Location
The night view assist control unit is located on the left on the A-pillar behind the paneling in the driver footwell.
Tasks
- To record information from the night view assist camera (B84/2)
- Picture processing
- Transmit the display picture to the instrument cluster (A1)
- Fault detection and administration
- Diagnosis
Function
The night view assist control unit is a subscriber to the vehicle dynamics CAN and receives the video pictures of the night view assist camera via the digital video interface (Low-Voltage Differential Signaling) and processes them.
After this the processed video picture is transmitted to the instrument cluster via a further digital interface.
Camera control is realized by the night view assist control unit via a control channel of the digital video interface.
Discrete inputs
- Terminal 87F
- Digital video interface to night view assist camera
Discrete outputs
- Digital video interfaces to instrument cluster