COMAND display, component description - GF54.30-P-6110LE

MODEL 216, 221 except CODE (867) SPLITVIEW as of Model Year 2009/YoM 08 

Shown on model 221 

Location 

The COMAND display is located in the center of the instrument panel.

Task 

The COMAND display provides uniform display of user-relevant operation and information windows as well as the display of video image information (with code (863) TV tuner digital/analog or code (498) Japan version).

The COMAND display also performs the following tasks:

• Reading in of signals 

Reading in of signals 

Signals are read in via the following connections:

• Telematics CAN (CAN A) 
• Low Voltage Differential Signal (LVDS) line 

Telematics CAN 

The COMAND display is a subscriber of telematics CAN.

The COMAND display reads in the signals.

The functions resulting therefrom are described in the corresponding function descriptions (see the appropriate block diagram or function schematic).

LVDS line 

The COMAND display receives all information via the LVDS line for the display of corresponding data content from the COMAND controller unit (A40/3).

Body 

The COMAND display is a swiveling 8 -Thin Film Transistor (TFT color screen in 16:9 format with a resolution of 800 X 480 pixels. In addition, two photosensors for automatic brightness control, and an electric motor for manual adjustment about the vertical axis are integrated in the COMAND display.

Variants 

• Left-hand drive vehicle
• Right-hand drive vehicle

	Cockpit Management and Data System (COMAND) control unit wiring diagram	Model 216 up to 31.5.09 Without code (498) Japan version	PE82.85-P-2101-99CAA
		Model 216 as of 1.6.09 Without code (498) Japan version	PE82.85-P-2101-99CAE
		Model 216 With code (529) HIGH Class Japan	PE82.85-P-2101-99CAD
		Model 221 up to 31.5.09 Without code (498) Japan version	PE82.85-P-2101-99SAA
		Model 221 as of 1.6.09 Without code (498) Japan version	PE82.85-P-2101-99SAE
		Model 221 with code (529) HIGH Class Japan	PE82.85-P-2101-99SAD