Checking tires for lateral and radial runout - AR40.10-P-1025A
MODEL all
| Checking | |||
| Notes on tire flat spots | AH40.10-P-1030-01A | ||
| Measure tire lateral runout and radial runout on a balancing machine with stationary concentricity measuring instrument | Measuring instrument for radial and lateral runout gotis://F 40.1 08.0 |
||
| Measure | |||
| 1 | Measure tire lateral runout halfway up tire sidewall | Select the measuring point such that the roller does not run over the tire designations or protective strip. Permissible lateral runout (S) with tire mounted |
*BE40.10-P-1004-01A |
| 2 | Measure tire radial runout at center of tire tread | Permissible radial runout (H) with tire mounted | *BE40.10-P-1002-01A |
| 3 | Eliminate radial runout |
WHEELS, TIRES
| Number | Designation | All models | ||
|---|---|---|---|---|
| BE40.10-P-1002-01A | Permissible radial runout (H) with tire mounted | Sheet-steel disc wheel | mm | 1.0 |
| Light alloy rim | mm | 1.0 | ||
| See picture | - | |||
| BE40.10-P-1004-01A | Permissible lateral runout (S) with tire mounted | Sheet-steel disc wheel | mm | 1.0 |
| Light alloy rim | mm | 1.0 | ||
| See picture | - |