Drain oil from rear axle differential - AR35.31-P-0520-06SX
MODEL 204, 207, 212, 216, 218, 221
DIFFERENTIAL HOUSING
| Number | Designation | Model 204 | Model 207 | Model 212 | Model 218 | |
|---|---|---|---|---|---|---|
| BA35.31-P-1003-02H | Oil drain screw, differential | Nm | 50 | 50 | 50 | 50 |
DIFFERENTIAL HOUSING
| Number | Designation | Model 216 | Model 221 | |
|---|---|---|---|---|
| BA35.31-P-1003-02G | Oil drain screw, differential | Nm | 50 | 50 |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1061-01A | Sealant, Omnifit 100H (50 g) | A 002 989 23 71 |
| BR00.45-Z-1046-04A | Loctite 7063 cleaning spray (150 ml) | A 001 986 71 71 10 |
- Clean area around oil drain screw (50h).
- Remove oil drain screw (50h).
Oil drain screw (50h) must be replaced.
- Clean the new oil drain screw and threaded hole in the rear axle differential with cleaning spray.
- Coat roughly one droplet of sealant on the second or third lower thread of the new oil drain screw.
- Screw oil drain screw into rear axle center assembly immediately and tighten to specified tightening torque.