Electrical function schematic, overheating/knock protection function ME - PE07.61-P-2777-99FAB
WARNING: This page is about a different car, the 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Fan motor, specified RPM request | 6 D |
| 2 | Fan motor, status | 5 E |
| B11/4 | Coolant temperature sensor | 1 H |
| B2/5 | Hot film mass air flow sensor | 6 K |
| B2/5b1 | Intake air temperature sensor | 6 K |
| B28 | Pressure sensor | 8 D |
| B37 | Accelerator pedal sensor | 1 E |
| B70 | Crankshaft Hall sensor | 8 H |
| M16/6 | Throttle valve actuator | 2 K |
| M4/7 | Combustion engine and air conditioning with integrated control fan motor | 7 B |
| N3/10 | ME-SFI [ME] control unit | 4 E |
| Y110 | Coolant thermostat | 5 K |
| Y62/1 | Cylinder 1 injection valve | 4 B |
| Y62/2 | Cylinder 2 injection valve | 4 B |
| Y62/3 | Cylinder 3 injection valve | 4 C |
| Y62/4 | Cylinder 4 injection valve | 4 C |
| Y62/5 | Cylinder 5 injection valve | 4 C |
| Y62/6 | Cylinder 6 injection valve | 4 C |