Special tools: Passenger cars: Part numbers 203 - WS00.01-Z-9203AZ
WARNING: This page is about a different car, the 2012 Mercedes-Benz C300, 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL all
| 203 589 00 07 00 Pin wrench insert | FG 32/Set B | WS32.00-P-0051B |
| 203 589 00 09 00 Torx wrench set | FG 82/Set K | WS82.00-P-3003K |
| 203 589 00 10 00 Wrench socket | FG 83/Set K | WS83.00-P-3022K |
| 203 589 00 14 00 Sleeve | GROUP 28/Set C | WS28.00-P-0076C |
| 203 589 00 15 00 Drift | FG 28/Set B | WS28.00-P-0068B |
| 203 589 00 23 00 Test and welding jig | FG 63/Set K | WS63.00-P-1126K |
| 203 589 00 26 00 Inlet connection | FG 47/ Set B | WS47.00-P-0014B |
| 203 589 00 27 00 Tension device | FG 62/Kit K | WS62.00-P-0110K |
| 203 589 00 33 00 Puller | FG 33/35/01/Set B | WS33.00-P-0147B |
| 203 589 00 40 00 Counterholder | FG 28/Set B | WS28.00-P-0077B |
| 203 589 00 43 00 Removal and installation tool | FG 35/Set B | WS35.00-P-0180B |
| 203 589 00 63 00 Number punch guide | FG 60/Set K | WS60.00-P-0044K |
| 203 589 00 91 00 Caps | FG 63/Set K | WS63.00-P-1127K |
| 203 589 00 91 01 Rubber cap | FG63/Set K | WS63.00-P-1127-01K |
| 203 589 00 91 02 Cover plate | FG63/Set K | WS63.00-P-1127-02K |
| 203 589 01 07 00 Pronged wrench | FG 47/Set B | WS47.00-P-0012B |
| 203 589 01 09 00 Socket wrench bit | FG 35/Set B | WS35.00-P-0246B |
| 203 589 01 10 00 Valve wrench | FG 83/Set K | WS83.00-P-3023K |
| 203 589 01 14 00 Sleeve | FG 35/Set C | WS35.00-P-0237C |
| 203 589 01 15 00 Drift | FG 28/Set B | WS28.00-P-0069B |
| 203 589 01 22 00 Service CD/DVD software set | Group 82/Set B | WS82.00-P-0120B |
| 203 589 01 23 00 Templates | FG 88/Kit K | WS88.00-P-0023K |
| 203 589 01 27 00 Puller | Group 62/Set K | WS62.00-P-0111K |
| 203 589 01 31 00 Tensioning device | FG 32/60/Set B | WS32.00-P-0052B |
| 203 589 01 31 28 Repair kit | FG32/60/Set B | WS32.00-P-0052-01B |
| 203 589 01 43 00 Removal and installation tool | FG 35/Set B | WS35.00-P-0181B |
| 203 589 01 63 00 Clamping plates | FG 32/Set B | WS32.00-P-0053B |
| 203 589 01 63 02 Clamping plate | FG32/Set B | WS32.00-P-0053-01B |
| 203 589 02 10 00 Torx blade | FG 33/Set B | WS33.00-P-0154B |
| 203 589 02 10 00 Torx blade | FG 91/Set B | WS91.00-P-0048B |
| 203 589 02 15 00 Drift | FG 28/Set B | WS28.00-P-0070B |
| 203 589 02 23 00 Templates | FG 88/set K | WS88.00-P-0024K |
| 203 589 02 27 00 Tension device | FG 64/Kit K | WS64.00-P-0106K |
| 203 589 02 31 00 Adapter kit | FG 60/61/Set K | WS60.00-P-3015K |
| 203 589 02 33 00 Puller | FG 01/33/46/Set B | WS01.00-P-0139B |
| 203 589 02 33 00 Puller | FG 28/33/Set B | WS28.00-P-0078B |
| 203 589 02 33 01 Threaded spindle | FG 28/01/33/46/Set B | WS28.00-P-0078-01B |
| 203 589 02 43 00 Installation tool | FG 33/Set C | WS33.00-P-0119C |
| 203 589 02 63 00 Test cable, 47-pin (ESP) | FG 42/Set B | WS42.00-P-0047B |
| 203 589 03 10 00 Valve wrench | FG 83/91/Set A | WS83.00-P-0060A |
| 203 589 03 15 00 Drift | GROUP 28/Set C | WS28.00-P-0071C |
| 203 589 03 22 00 Software service CD | FG 82/Set B | WS82.00-P-0131B |
| 203 589 03 31 00 Bracket | FG 46/Set C | WS46.00-P-0085C |
| 203 589 03 33 00 Internal extractor | FG 33/Set B | WS33.00-P-0148B |
| 203 589 03 63 00 Chain | FG 33/Set B | WS33.00-P-0123B |
| 203 589 04 15 00 Drift | FG 28/Set C | WS28.00-P-0072C |
| 203 589 04 22 00 Software service CD | FG 82/Set B | WS82.00-P-0132B |
| 203 589 04 23 00 Inspection and welding device | Group 62/Set K | WS62.00-P-0032K |
| 203 589 04 31 00 Steering gear housing support | FG 46/Set C | WS46.00-P-0083C |
| 203 589 04 31 01 Threaded rod M10 | FG46/Set C | WS46.00-P-0083-01C |
| 203 589 04 31 02 Threaded rod M12 | FG46/Set C | WS46.00-P-0083-02C |
| 203 589 04 31 03 Socket wrench | FG46/Set C | WS46.00-P-0083-03C |
| 203 589 04 33 00 Removal lever | FG 82/91/Set B | WS82.00-P-0116B |
| 203 589 05 15 00 Drift | FG 28/Set C | WS28.00-P-0073C |
| 203 589 05 22 00 Software service DVD | FG 82/Set B | WS82.00-P-0133B |
| 203 589 05 23 00 Inspection and welding device | Group 62/Set K | WS62.00-P-0033K |
| 203 589 05 63 00 Cutting blade | FG 67/Set K | WS67.00-P-0024K |
| 203 589 06 15 00 Drift | FG 28/Set C | WS28.00-P-0074C |
| 203 589 06 22 00 Software format CD | FG 82/Set B | WS82.00-P-0146B |
| 203 589 06 23 00 Cutting templates | FG 63/Kit K | WS63.00-P-1125K |
| 203 589 06 63 00 Programming adapter | FG 54/Set B | WS54.00-P-0074B |
| 203 589 07 15 00 Drift | GROUP 28/Set C | WS28.00-P-0075C |
| 203 589 07 23 00 Spacer blocks | FG 65/Kit K | WS65.00-P-0009K |
| 203 589 07 63 00 Test adapter | FG 82/Set B | WS82.00-P-0145B |
| 203 589 08 15 00 Drift | FG 33/Set B | WS33.00-P-0124B |
| 203 589 09 23 00 Mounts | FG 35/Set C | WS35.00-P-0182C |
| 203 589 10 23 00 Cutting templates | FG 63/Set K | WS63.00-P-1128K |
| 203 589 11 23 00 Spacer block | FG 77/Set K | WS77.00-P-0022K |
| 203 589 12 23 00 Templates | Group 88/Set K | WS88.00-P-0040K |
| 203 589 13 23 00 Spacer blocks | FG 65/Set K | WS65.00-P-0022K |
| 203 589 14 23 00 Check and welding device | FG 62/Set K | WS62.00-P-0130K |
| 203 589 15 23 00 Check and welding device | FG 62/Set K | WS62.00-P-0128K |