Special tools: Passenger cars: Part numbers 140 - WS00.01-Z-9140AZ

WARNING: This page is about a different car, the 2012 Mercedes-Benz C300, 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

MODEL all

140 589 00 01 00 Open-end wrench	FG 26/Set C	WS26.00-P-0043C
140 589 00 01 00 Open-end wrench	GROUP 28/Set C	WS28.00-P-0028C
140 589 00 01 00 Open-end wrench	FG 33/Set C	WS33.00-P-0030C
140 589 00 01 00 Open-end wrench	FG 35/Set C	WS35.00-P-0078C
140 589 00 03 00 Box wrench bit	FG 32/42/Set B	WS42.00-P-0074B
140 589 00 03 00 Box wrench socket	FG 18/Set B	WS18.00-P-0012B
140 589 00 03 00 Box wrench socket	FG 26/Set B	WS26.00-P-0044B
140 589 00 07 00 Pin-type face wrench	FG 82/Set K	WS82.00-P-0005K
140 589 00 08 00 Socket	FG 35/Set C	WS35.00-P-0079C
140 589 00 09 00 Socket wrench	FG 72/Set K	WS72.00-P-0009K
140 589 00 14 00 Sleeve	FG 27/Set C	WS27.00-P-0035C
140 589 00 15 00 Drift punch	FG 33/Set C	WS33.00-P-0031C
140 589 00 19 00 Caliper gauge	FG 42/Set A	WS42.00-P-0028A
140 589 00 23 00 Welding gauge	FG 62/Set K	WS62.00-P-0016K
140 589 00 27 00 Pulling device	FG 60/Set K	WS60.00-P-0030K
140 589 00 33 00 Puller	FG 33/Set B	WS33.00-P-0157B
140 589 00 33 00 Puller	FG 35/33/Set B	WS35.00-P-0080B
140 589 00 33 00 Puller	FG 46/Set B	WS46.00-P-0040B
140 589 00 34 00 Collet chuck	FG 35/33/Set C	WS35.00-P-0081C
140 589 00 37 00 Assembly pliers	FG 77/Set K	WS77.00-P-0014K
140 589 00 43 00 Installation tool	FG 33/Set C	WS33.00-P-0032C
140 589 00 46 00 Drive flange	FG 35/Set C	WS35.00-P-0082C
140 589 00 59 00 Assembly fixture	FG 46/Set C	WS46.00-P-0041C
140 589 00 62 00 Assembly support	FG 33/Set B	WS33.00-P-0033B
140 589 00 63 00 Thrust piece	FG 33/32/35/Set B	WS33.00-P-3050B
140 589 00 63 00 Thrust piece	FG 46/33/Set B	WS46.00-P-0042B
140 589 00 98 00 All-round cover	FG 83/Set K	WS83.00-P-0021K
140 589 01 07 00 Pin wrench	FG 63/67/68/Set K	WS67.00-P-0010K
140 589 01 09 00 Socket	FG 35/Set C	WS35.00-P-0083C
140 589 01 15 00 Drift	FG 26/Set C	WS26.00-P-0121C
140 589 01 15 00 Drift	GROUP 28/Set C	WS28.00-P-0086C
140 589 01 15 00 Drift	FG 46/Set C	WS46.00-P-0043C
140 589 01 27 00 Pulling device	FG 60/Set K	WS60.00-P-0031K
140 589 01 33 00 Mounting lever	FG 07/Set A	WS07.00-P-0037A
140 589 01 33 00 Mounting lever	FG 54/Set A	WS54.00-P-0009A
140 589 01 34 00 Collet chuck	FG 33/35/Set B	WS33.00-P-0112B
140 589 01 34 00 Collet chuck	FG 35/Set C	WS35.00-P-0085C
140 589 01 43 00 Installation tool	FG 35/Set C	WS35.00-P-0086C
140 589 01 61 00 Engine support frame	FG 01/33/60/Set C	WS01.00-P-0032C
140 589 01 62 00 Assembly support	FG 35/Set B	WS35.00-P-0087B
140 589 01 63 00 Contacting module 1	FG 54/Set B	WS54.00-P-0010B
140 589 01 98 00 All-round cover	FG 83/Set K	WS83.00-P-0022K
140 589 02 07 00 Pin wrench socket	FG 46/Set C	WS46.00-P-0044C
140 589 02 15 00 Drift punch	FG 35/Set B	WS35.00-P-0088B
140 589 02 31 00 Spreader	FG 33/Set C	WS33.00-P-0036C
140 589 02 33 00 Pulling hook	FG 46/Set B	WS46.00-P-0091B
140 589 02 33 00 Pulling hook	FG 46/54/68/82/83/91/Set B	WS54.00-P-0011B
140 589 02 33 00 Pulling hook	FG 46/67/68/72/77/80/ 82/83/ 88/91/Set B	WS91.00-P-0024K
140 589 02 34 00 Tensioning clamp	FG 35/Set C	WS35.00-P-0089C
140 589 02 61 00 Disassembly tool	FG 72/Set K	WS72.00-P-0010K
140 589 03 07 00 Pin wrench	FG 46/Set C	WS46.00-P-0045C
140 589 03 09 00 Socket wrench	FG 42/25/Set B	WS42.00-P-0032B
140 589 03 15 00 Drift	FG 26/Set C	WS26.00-P-0119C
140 589 03 15 00 Drift	FG 35/Set C	WS35.00-P-0091C
140 589 03 21 00 Measuring device	FG 40/Set B	WS40.00-P-0028B
140 589 03 33 00 Removal tool	FG 35/Set C	WS35.00-P-0092C
140 589 03 63 00 Contacting module 3	FG 07/Set B	WS07.00-P-0039B
140 589 03 63 00 Contacting module 3	FG 27/Set B	WS27.00-P-0036B
140 589 03 63 00 Contacting module 3	FG 30/Set B	WS30.00-P-0004B
140 589 04 07 00 Pin wrench socket	FG 46/Set C	WS46.00-P-0046C
140 589 04 09 00 Socket wrench	FG 72/Set K	WS72.00-P-0011K
140 589 04 15 00 Sleeve	FG 35/Set C	WS35.00-P-0094C
140 589 04 21 00 Adjusting gauge	FG 77/Set K	WS77.00-P-0015K
140 589 04 23 00 Adjusting gauge	FG 46/Set C	WS46.00-P-0047C
140 589 04 31 00 Retaining device	FG 46/Set C	WS46.00-P-0048C
140 589 04 33 00 Installation tool	FG 35/Set C	WS35.00-P-0095C
140 589 04 34 00 Puller arms	FG 26/33/35/Set C	WS26.00-P-0045C
140 589 04 63 00 Contacting module 4	FG 32/Set B	WS32.00-P-0021B
140 589 04 63 00 Contacting module 4	FG 35/Set B	WS35.00-P-0096B
140 589 04 63 00 Contacting module 4	FG 42/Set B	WS42.00-P-0033B
140 589 04 63 00 Contacting module 4	FG 46/Set B	WS46.00-P-0049B
140 589 05 09 00 Pronged wrench	FG 54/set B	WS54.00-P-0045B
140 589 05 15 00 Drift punch	FG 35/Set B	WS35.00-P-0097B
140 589 05 21 00 Adjusting gauge	FG 77/Set K	WS77.00-P-0016K
140 589 05 23 00 Gauge, left	FG 63/64/Set K	WS63.00-P-0011K
140 589 05 31 00 Spreader	FG 35/Set C	WS35.00-P-0155C
140 589 05 33 00 Removal tool	FG 35/Set C	WS35.00-P-0098C
140 589 05 34 00 Collet chuck	FG 26/Set C	WS26.00-P-0046C
140 589 05 43 00 Removal and installation tool	FG 35/Set C	WS35.00-P-0099C
140 589 05 63 00 Contacting module 5	FG 30/Set B	WS30.00-P-0005B
140 589 06 15 00 Drift	FG 35/Set C	WS35.00-P-0100C
140 589 06 21 00 Locating pin	FG 72/Set K	WS72.00-P-0012K
140 589 06 23 00 Gauge, right	FG 63/64/Set K	WS63.00-P-0012K
140 589 06 31 00 Unlocking tool	FG 54/Set B	WS54.00-P-0044B
140 589 06 34 00 Collet chuck	FG 26/27/Set C	WS27.00-P-0053C
140 589 06 43 00 Removal and installation tool	FG 35/33/Set C	WS35.00-P-0101C
140 589 06 63 00 Contacting box	FG 54/Set B	WS54.00-P-0013B
140 589 07 15 00 Drift punch	FG 46/Set C	WS46.00-P-0050C
140 589 07 21 00 Measuring device	FG 35/Set C	WS35.00-P-0102C
140 589 07 23 00 Supports	FG 27/record C	WS27.00-P-0145C
140 589 07 23 00 Supports	FG 33/Set C	WS33.00-P-0037C
140 589 08 15 00 Drift	FG 26/Set C	WS26.00-P-0120C
140 589 08 15 00 Drift	FG 35/Set B	WS35.00-P-0148B
140 589 08 21 00 Backlash measuring instrument	FG 35/Set C	WS35.00-P-0103C
140 589 08 23 00 Template	FG 65/Set K	WS65.00-P-0007K
140 589 08 33 00 Installation tool	FG 33/Set C	WS33.00-P-0038C
140 589 08 43 00 Extractor and insertion tool	FG 33/Set B	WS33.00-P-0113B
140 589 08 43 00 Extractor and insertion tool	FG 35/Set C	WS35.00-P-0104C
140 589 09 15 00 Drift punch	FG 35/Set C	WS35.00-P-0105C
140 589 09 21 00 Simulator	FG 07/Set B	WS07.00-P-0040B
140 589 09 23 00 Template	FG 65/Set K	WS65.00-P-0008K
140 589 09 33 00 Puller	FG 33/Set C	WS33.00-P-0039C
140 589 09 33 00 Puller	FG 46/Set C	WS46.00-P-0095C
140 589 09 63 00 Measuring fixture set	FG 40/Set C	WS40.00-P-0029C
140 589 10 15 00 Drift	FG 35/Set C	WS35.00-P-0149C
140 589 10 21 00 Simulator	FG 07/Set B	WS07.00-P-0041B
140 589 10 23 00 Template	FG 63/Set K	WS63.00-P-0013K
140 589 10 33 00 Spacer	FG 54/Set B	WS54.00-P-0014B
140 589 10 43 00 Removal and installation tool	FG 35/Set C	WS35.00-P-0107C
140 589 10 63 00 Test cable	FG 15/Set B	WS15.00-P-0013B
140 589 11 23 00 Template	FG 63/Set K	WS63.00-P-0014K
140 589 11 33 00 Puller	FG 33/Set C	WS33.00-P-0040C
140 589 11 43 00 Removal and installation tool	FG 33/Set C	WS33.00-P-0041C
140 589 11 43 99 Repair kit	FG33/Set C	WS33.00-P-0041-02C
140 589 11 63 00 Test cable	FG 91/Set B	WS91.00-P-0010B
140 589 12 15 00 Drift	FG 01/Set B	WS01.00-P-0123B
140 589 12 15 00 Drift	FG 26/Set C	WS26.00-P-0117C
140 589 12 15 00 Drift	FG 27/Set B	WS27.00-P-0048B
140 589 12 15 00 Drift	FG 28/Set B	WS28.00-P-0063B
140 589 12 21 00 Baseline current draw test adapter 1	FG 42/43/54/Set B	WS54.00-P-0015B
140 589 12 23 00 Set of test and welding gauges	FG 63/Set K	WS63.00-P-0015K
140 589 12 33 00 Installation tool	FG 35/Set C	WS35.00-P-0108C
140 589 12 63 00 Test cable	FG 80/Set B	WS80.00-P-0002B
140 589 13 15 00 Drift	FG 35/Set C	WS35.00-P-0192C
140 589 13 21 00 Quiescent current test adapter 2	FG 42/43/54/Set B	WS54.00-P-0016B
140 589 13 23 00 Template	FG 63/Set K	WS63.00-P-0016K
140 589 13 33 00 Extraction tool	FG 35/Set C	WS35.00-P-0109C
140 589 13 43 00 Assembly device	FG 27/Set C	WS27.00-P-0049C
140 589 13 63 00 21-pin test cable	FG 80/Set B	WS80.00-P-0003B
140 589 14 15 00 Drift	FG 35/Set C	WS35.00-P-0191C
140 589 14 21 00 Measuring device	FG 35/Set C	WS35.00-P-0156C
140 589 14 23 00 Mounting fixtures	FG 35/Set C	WS35.00-P-0110C
140 589 14 33 00 Installation tool	FG 35/Set C	WS35.00-P-0111C
140 589 14 63 00 Adapter	FG 27/Set B	WS27.00-P-0037B
140 589 14 63 00 Adapter	FG 32/Set B	WS32.00-P-0022B
140 589 14 63 00 Adapter	FG 35/Set B	WS35.00-P-0112B
140 589 14 63 00 Adapter	FG 42/Set B	WS42.00-P-0034B
140 589 14 63 00 Adapter	FG 46/Set B	WS46.00-P-0051B
140 589 14 63 00 Adapter	FG 54/Set B	WS54.00-P-0017B
140 589 14 63 00 Adapter	FG 83/Set B	WS83.00-P-0023B
140 589 15 21 00 Dipstick	FG 27/Set B	WS27.00-P-0047B
140 589 15 23 00 Welding gauge	FG 62/Set K	WS62.00-P-0017K
140 589 16 15 00 Drift	FG 33/Set C	WS33.00-P-0183C
140 589 16 15 00 Drift	FG 35/Set C	WS35.00-P-0193C
140 589 16 23 00 Measuring plate	FG 35/Set C	WS35.00-P-0113C
140 589 16 63 00 Removal lever	FG 72/Set K	WS72.00-P-0013K
140 589 17 23 00 Gauge	FG 63/64/Set K	WS63.00-P-0017K
140 589 17 33 00 Removal tool	FG 35/Set C	WS35.00-P-0114C
140 589 17 63 00 Connection fitting	FG 46/Set B	WS46.00-P-0052B
140 589 18 23 00 Gauge	FG 63/64/Set K	WS63.00-P-0018K
140 589 18 63 00 Puller hook	FG 88/Set K	WS88.00-P-0003K
140 589 20 63 00 Adapter cable	FG 91/Set B	WS91.00-P-0011B
140 589 22 23 00 Stretching irons	FG 72/Set K	WS72.00-P-0014K
140 589 23 23 00 Template for left section of rear end center assembly	FG 64/Set K	WS64.00-P-0010K
140 589 24 23 00 Template for right section of rear end center assembly	FG 64/Set K	WS64.00-P-0011K
140 589 24 63 00 Thrust piece	FG 33/Set C	WS33.00-P-0042C
140 589 25 23 00 Set of test and welding gauges	FG 63/Set K	WS63.00-P-0019K
140 589 25 63 00 Magnet	FG 35/Set C	WS35.00-P-0117C
140 589 26 23 00 Multi-Z elements MZ 260	FG 60/63/Set K	WS63.00-P-0020K
140 589 26 63 00 Stamping symbols set	FG 43/60/62/Set K	WS62.00-P-0018K
140 589 26 63 01 Steel stamping letters set	Group 43/62/Set K	WS62.00-P-0018-01K
140 589 26 63 02 Steel stamping letters retrofit kit	Group 43/62/Set K	WS62.00-P-0018-02K
140 589 26 63 03 Stamping numbers set	Group 43/62/Set K	WS62.00-P-0018-03K
140 589 26 63 04 Star die	FG 43/62/Set K	WS62.00-P-0018-04K
140 589 26 63 05 Steel stamping letters set	FG 43/60/62/Set K	WS62.00-P-0018-05K
140 589 27 23 00 Set of adhesive templates for model designation plate, complete	FG 88/Set K	WS88.00-P-0004K
140 589 27 63 00 Mounting fixture	FG 27/Set C	WS27.00-P-0038C
140 589 27 63 04 Clamping plate	FG 27/Set C	WS27.00-P-0038-01C
140 589 28 23 00 Set of adhesive templates for model identification	FG 88/Set K	WS88.00-P-0005K
140 589 28 63 00 Thrust washer	FG 33/35/Set C	WS33.00-P-0043C
140 589 29 23 00 Set of adhesive templates for model designation plate, complete	FG 88/Set K	WS88.00-P-0006K
140 589 29 63 00 CAN 140 82-pin test cable	FG 07/Set B	WS07.00-P-0042B
140 589 31 23 00 Mount for glue-on letters	FG 88/Set K	WS88.00-P-0015K
140 589 34 23 00 Assembly tool	FG 88/Set K	WS88.00-P-0008K
140 589 34 63 00 Mounting plate	FG 26/Set C	WS26.00-N-3476C
140 589 34 63 00 Mounting plate	FG 27/Set C	WS27.00-P-0051C
140 589 37 63 00 Retaining bracket (2 each)	FG 40/Set C	WS40.00-P-0042C
140 589 39 63 00 Test cable for module 6	FG 35/Set B	WS35.00-P-0151B
140 589 40 63 00 Supports (2 ea.)	FG 35/Set C	WS35.00-P-0157C
140 589 41 63 00 Intermediate rings (x 2)	FG 35/Set C	WS35.00-P-0158C
140 589 43 63 00 -pin test cable	FG 54/Set B	WS54.00-P-0020B
140 589 43 63 00 Test cable, 30-pin	FG 27/Set B	WS27.00-P-0050B
140 589 44 63 00 24-pin test cable	FG 83/Set B	WS83.00-P-0026B
140 589 45 63 00 -pin test cable	FG 42/Set B	WS42.00-P-0038B
140 589 45 63 00 Test cable 80-pin	FG 32/Set B	WS32.00-P-0049B
140 589 46 63 00 Test cable, 117-pin	FG 07/Set B	WS07.00-P-0060B
140 589 47 63 00 Adapter cable	FG 82/Set B	WS82.00-P-0013B
140 589 49 63 00 Filling pipe	FG 27/Set A	WS27.00-P-0055A
140 589 50 63 00 Test cable 16-pin	FG 42/set B	WS42.00-P-0039B
140 589 51 63 00 Test adapter	FG 83/set K	WS83.00-P-0042K
140 589 51 63 01 Adapter hose	FG83/Set B	WS83.00-P-0042-01B