Open and close coupling - AR09.41-P-1311-01AL
WARNING: This page is about a different car, the 2011 Mercedes-Benz C350, 2010 Mercedes-Benz C350, 2009 Mercedes-Benz C350, and 2008 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
Open coupling
- Slide nose (2) of catch spring (3) to position (B).
Do not pull on the eyelet (1) as the catch spring (3) will lose pretension.
- Detach hose on component.
- Replace seal. Close coupling
Close coupling
- Slide nose (2) of catch spring (3) to position (A).
- Slide hose onto component until the catch spring (3) latches.
- Check connection by pulling a little at the hose.