211 589 11 23 00 Measuring device - WS35.00-P-0198C

WARNING: This page is about a different car, the 2012 Mercedes-Benz C300, 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

FG 35/Kit C

MODEL 170, 203, 209, 211

Use:

Gauge for shims on drive pinions.

NOTE: 187 mm crown wheel Ø.

Fig 1: Identifying Measuring Device (211 589 11 23 00)

Courtesy of MERCEDES-BENZ USA