123 589 08 33 00 Puller - WS35.00-P-0044C
WARNING: This page is about a different car, the 2012 Mercedes-Benz C300, 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
FG 35/Set C
MODEL 107, 123, 124, 126, 129, 140, 170, 171, 201, 202, 203, 208, 209, 210, 211, 219, 220, 230
MODEL 463, 461 with REAR AXLE 741.1
MODEL 460, 461, 463 with REAR AXLE 741.5
MODEL 901, 902 with REAR AXLE 741.407
MODEL 903 with REAR AXLE 741.408
MODEL 904 with REAR AXLE 741.130
MODEL XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD6, YD7, WD1, WD2, WD3, WD6, WD7 with REAR AXLE 741.408
MODEL XD4, XD5, YD4, YD5 with REAR AXLE 741.130
MODEL 461, 463 with REAR AXLE 742.6
MODEL 461 with REAR AXLE 741.6
Use:
Puller for tapered roller bearing from differential
NOTE:
Ring gear-Ø 185, 187, 198, 210 mm.