Separate/connect electrical connector at steering column switch module - AR54.25-P-2802-02CW

1. Remove locking clip (1s) in direction of arrow and out of the electrical connector (1).

   When the circlip (1s) is pulled out it is destroyed and it must be replaced.

   Fig 1: Removing Locking Clip

   Courtesy of MERCEDES-BENZ USA
2. Release catch tab (a) and pull electrical connector (1) upwards and out of coupling (2).
3. Connect in reverse order.

Fig 2: Releasing Catch Tab

Courtesy of MERCEDES-BENZ USA