Wiring diagram control unit DC/AC converter - PE54.10-P-2103-97FAA
MODEL 204.9 with CODE 460 (Canada version) with CODE 494 (US version) with CODE U80 (115 V socket in load compartment) Control unit N24/3 MODEL 204.0 as of model year 2011 with CODE 460 (Canada version) with CODE 494 (US version) with CODE
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 23L |
| N10/2 | Rear SAM control unit with fuse and relay module | 3L |
| N10/2 | Rear SAM control unit with fuse and relay module | 12L |
| N10/2f64 | Fuse 64 | 2L |
| N10/2f64 | Fuse 64 | 11L |
| N10/2f72 | Fuse 72 | 5L |
| N10/2f72 | Fuse 72 | 14L |
| N24/3 | DC/AC converter control unit | 4A |
| N24/3 | DC/AC converter control unit | 13A |
| U58 | Valid for model 204.0 | 9A |
| U59 | Valid for model 204.9 | 1A |
| W7/1 | Right taillamp trunk ground point | 13E |
| W7/2 | Ground/trunk right side wall | 5E |
| X58/34 | 115 V socket | 8L |
| X58/34 | 115 V socket | 16L |
| X58/34s1 | Socket microswitch | 7K |
| X58/34s1 | Socket microswitch | 15K |