Prepare panoramic roof frame body flange for installation. - AR77.21-P-0800-05CW

MODEL 204.0 with CODE (413) Panoramic sliding roof

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1031-02A	Repair kit, installing window 500662 01/03/05/07/09/11	A 973 670 00 93

Do not touch available adhesive beads and bonding surfaces (1) with bare fingers. The bonding surfaces (1) and adhesive beads must be free of dust, oil, grease, wax, dirt residues and other adhesive components. Otherwise the strength of the glued connection is not ensured

Fig 1: Identifying Adhesive Bead Applying Area Of Roof Frame

Courtesy of MERCEDES-BENZ USA

Cut available adhesive beads on bonding surfaces (1) down to a remaining height of approx. 1 mm to max. 2 mm. Remove glue residues. Remove remaining pieces of adhesive beads not completely cut off. Wet/dry vacuum cleaner
Repair paint damage on body
Apply primer to body on which remaining adhesive material is no longer present.
Observe processing instructions for primer to prevent adhesion problems with the adhesive material when gluing in.