Remove/install sealing strip on door bottom edge - AR72.12-P-1019CW

Shown on model 204.0 

Fig 1: Identifying Arrow Marking On Sealing Strip And Hook

Courtesy of MERCEDES-BENZ USA

	Removing
1	Press down sealing strip (1) on hook (2) above arrow marking (3) with long wedge and disengage hook (2).		Fig 2
2	Pull sealing strip (1) toward rear and remove downward
	Install
3	Position sealing strip (1) at door bottom edge and slide toward front until all clips (4) on door bottom edge are arrested

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA