Electrical system function schematic for headlamp cleaning system (HCS) - PE82.15-P-2050-97FAA
MODEL 204.0 /2
with CODE (600) Headlamp cleaning system as of model year 2009 /YoM 08
MODEL 204.3
with CODE (600) Headlamp cleaning system
MODEL 204.9
with CODE (600) Headlamp cleaning system
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Circuit 15, status | 6E |
| 2 | Engine running, signal | 7F |
| 3 | Drivetrain operational, signal | 7G |
| 4 | Combination switch, status | 8E |
| 4 | Combination switch, status | 11E |
| 5 | Headlamp cleaning system pump, actuation | 7C |
| CAN B | Interior CAN | 4E |
| CAN E | Chassis CAN | 9E |
| CAN E | Chassis CAN | 7G |
| M5/2 | Headlamp cleaning system pump | 7C |
| N10/1 | Front SAM control unit with fuse and relay module | 7D |
| N3/10 | ME-SFI [ME] control unit | 8H |
| N3/9 | CDI control unit | 5H |
| N73 | Electronic ignition switch control unit | 2E |
| N80 | Steering column module control unit | 12D |
| S4 | Combination switch | 10D |
| U75 | Valid for gasonline engines | 7H |