Electrical function schematic for TELEAID TELEDIAGNOSIS - PE82.95-P-2060-97FAA
MODEL 204 with CODE (359) TELE AID emergency call system with CODE (389) Mobile phone preinstallation with universal interface, USA/Canada up to model year 08/YoM 07 comfort telephony
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Circuit 15, status | 3H |
| 1 | Circuit 15, status | 8F |
| 2 | TELEDIAGNOSIS, signal | 10E |
| 3 | Telephone, signal | 12J |
| 3 | Telephone, signal | 10H |
| 3 | Telephone, signal | 12F |
| 4 | Audio/COMAND display, signal | 5B |
| 4 | Audio/COMAND display, signal | 3D |
| A2/52 | Emergency call system antenna | 14G |
| A28/11 | Multifunction antenna | 13K |
| A40/3 | COMAND control unit | 2B |
| A40/8 | Audio/COMAND display | 6B |
| A8/1 | Transmitter key | 3L |
| CAN B | Interior CAN | 2H |
| CAN B | Interior CAN | 2D |
| CAN D | Diagnostic CAN | 6F |
| Code 414 | Electric glass tilting/sliding roof | 9A |
| N10/1 | Front SAM control unit with fuse and relay module | 2E |
| N123/4 | Emergency call system control unit | 10E |
| N70 | Overhead control panel control unit | 11B |
| N70/3 | Overhead control panel electronics | 11A |
| N73 | Electronic ignition switch control unit | 2J |
| N96 | Frequency switchover control unit | 10J |
| S93/6s2 | TELEDIAGNOSIS button | 9C |
| U111 | Valid for overhead control panel without CAN | 9A |