Checking rear axle camber - AR40.20-P-0331CW
MODEL 172, 204, 207, 212, 218
| Checking | |||
|---|---|---|---|
| 1 | Checking rear axle camber | Camber at vehicle level: | |
| Model 172 | *BE40.20-P-1001-09AH | ||
| Model 204 | *BE40.20-P-1001-09AC | ||
| Model 207 | *BE40.20-P-1001-09AE | ||
| Model 212 | *BE40.20-P-1001-09AD | ||
| Model 218 | *BE40.20-P-1001-09AG | ||
| Permissible difference in rear axle camber between the right and left side of the vehicle: | |||
| Model 172 | *BE40.20-P-1003-09AH | ||
| Model 204 | *BE40.20-P-1002-09AC | ||
| Model 207 | *BE40.20-P-1002-09AE | ||
| Model 212 | *BE40.20-P-1002-09AD | ||
| Model 218 | *BE40.20-P-1002-09AG | ||
In the event of larger deviations in camber at the rear axle the following causes may exist:
|
|||
| Check unacceptable deformations on the body: I | |||
| Checking accident vehicles and vehicles possibly damaged in an accident | AR40.30-P-0400CW |
TEST VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 172 | ||
|---|---|---|---|---|
| BE40.20-P-1001-09AH | Camber at vehicle level | -0.6° | ∠° | -1° 43' (± 30') |
| -0.1° | ∠° | -1° 36' (± 30') | ||
| +0.4 | ∠° | -1° 31' (± 30') | ||
| +0.9 | ∠° | 1° 24' (± 30') | ||
| +1.4° | ∠° | -1° 19' (± 30') | ||
| +1.9° | ∠° | -1° 13' (± 30') | ||
| +2.4° | ∠° | -1° 07' (± 30') | ||
| +2.9° | ∠° | -1° 03' (± 30') | ||
| +3.4° | ∠° | -0° 57' (± 30') | ||
| BE40.20-P-1003-09AH | Permissible rear axle camber between right and left vehicle side | ∠° | 30' | |
TEST VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 except AMG, 4MATIC | Model 204.0/2 AMG | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +5.0° | ∠° | -0° 25' (± 30') | -0° 39' (±30') |
| +3.5° | ∠° | -0° 44' (± 30') | -0° 53' (± 30') | ||
| +2.0° | ∠° | -1° 04' (± 30') | -1° 11' (± 30') | ||
| +0.5° | ∠° | -1° 26' (± 30') | -1° 28' (± 30') | ||
| -1.0° | ∠° | -1° 47' (± 30') | -1° 46' (± 30') | ||
| -2.5° | ∠° | -2° 10' (± 30') | -2° 04' (± 30') | ||
| BE40.20-P-1002-09AC | Permissible rear axle camber between right and left vehicle side | ∠° | 30' | 30' |
TEST VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 4MATIC | Model 204.9 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +5.0° | ∠° | -0° 20' (±30') | -0° 58' (± 30') |
| +3.5° | ∠° | -0° 38' (± 30') | -1° 14' (± 30') | ||
| +2.0° | ∠° | -1° 00' (± 30') | -1° 31' (± 30') | ||
| +0.5° | ∠° | -1° 21' (± 30') | -1° 49' (± 30') | ||
| -1.0° | ∠° | -1° 43' (± 30') | - | ||
| -2.5° | ∠° | -2° 24' (± 30') | - | ||
| BE40.20-P-1002-09AC | Permissible rear axle camber between right and left vehicle side | ∠° | 30' | 30' |
TEST VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 207 | ||
|---|---|---|---|---|
| BE40.20-P-1001-09AE | Camber at vehicle level | +2.4° | ∠° | -1° 00' (± 30') |
| +1.4° | ∠° | -1° 12' (± 30') | ||
| +0.4° | ∠° | -1° 25' (±30') | ||
| -0.4° | ∠° | -1° 37' (± 30') | ||
| -1.4° | ∠° | -1° 53' (± 30') | ||
| BE40.20-P-1002-09AE | Permissible rear axle camber between right and left vehicle side | ∠° | 30' |
TEST VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.0/1/2 except AMG, except 4MATIC | Model 212.0/2 except AMG, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | +4.6° | ∠° | -0° 24' (± 30') | - |
| +3.6° | ∠° | -0° 36' (± 30') | - | ||
| +2.6° | ∠° | -0° 48' (± 30') | -0° 49' (± 30') | ||
| +1.7° | ∠° | - | -1° 01' (± 30') | ||
| +1.6° | ∠° | -1° 03' (± 30') | - | ||
| +0.7° | ∠° | - | -1° 16' (± 30') | ||
| +0.6° | ∠° | -1° 17' (± 30') | - | ||
| +0.3° | ∠° | - | - | ||
| -0.3° | ∠° | - | -1° 31' (± 30') | ||
| -0.6° | ∠° | -1° 34' (± 30') | - | ||
| -0.7° | ∠° | - | - | ||
| -1.3° | ∠° | - | -1° 47' (± 30') | ||
| -1.6° | ∠° | -1° 51' (± 30') | - | ||
| -1.7° | ∠° | - | - | ||
| -2.3° | ∠° | - | -2° 02' (± 30') | ||
| -2.6° | ∠° | -2° 07' (± 30') | - | ||
| -2.7° | ∠° | - | - | ||
| -3.7° | ∠° | - | - | ||
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left sides of the vehicle | ∠° | 30' | 30' |
TEST VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.0/2 AMG | ||
|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | +4.6° | 4° | - |
| +3.6° | ∠° | - | ||
| +2.6° | ∠° | - | ||
| +1.7° | ∠° | - | ||
| +1.6° | ∠° | - | ||
| +0.7° | ∠° | - | ||
| +0.6° | ∠° | - | ||
| +0.3° | ∠° | - 1° 42' (± 30') | ||
| -0.3° | ∠° | - | ||
| -0.6° | ∠° | - | ||
| -0.7° | ∠° | -1° 55' (± 30') | ||
| -1.3° | ∠° | - | ||
| -1.6° | ∠° | - | ||
| -1.7° | ∠° | -2° 10' (± 30') | ||
| -2.3° | ∠° | - | ||
| -2.6° | ∠° | - | ||
| -2.7° | ∠° | -2° 24' (± 30') | ||
| -3.7° | ∠° | -2° 37' (± 30') | ||
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left sides of the vehicle | ∠° | 30' |
TEST VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 218 except AMG | ||
|---|---|---|---|---|
| BE40.20-P-1001-09AG | Camber at vehicle level | +1.1° | ° | -1° 11' (± 30') |
| +0.7° | ∠° | -1° 17' (± 30') | ||
| +0.3° | ∠° | -1° 23' (± 30') | ||
| -0.1° | ∠° | -1° 30' (± 30') | ||
| -0.5° | ∠° | -1° 34' (± 30') | ||
| -0.9° | ∠° | -1° 40' (± 30') | ||
| -1.3° | ∠° | -1° 48' (+30') | ||
| BE40.20-P-1002-09AG | Permissible rear axle camber between right and left vehicle side | ∠° | 30' | |