LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2011 >> C350 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Air Intake, Turbo Charging - C350 (204) >> Testing & Repair >> Remove, install tumble flap and resonance flap switchover valve to intake manifold - AR09.20-P-1990CV

Remove, install tumble flap and resonance flap switchover valve to intake manifold - AR09.20-P-1990CV

ENGINE 272 (except 272.982) in MODEL 204 

ENGINE 272, 273 (except 272.984) in MODEL 207 

Fig 1: Removing And Installing Tumble Flap And Resonance Flap Switchover Valve Components
G07532764Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Remove resonance intake manifold   AR09.20-P-1961CV 
2 Detach pneumatic line (1 or 2) from switchover valve (Y22/6 or Y22/9) INSPECTInstallation:  Check pneumatic line (1 or 2) for damage and replace if necessary.  
3 Remove lock washer (3 or 4) IMPORTANTInstallation:  Replace lock washer (3 or 4).  
4 Disconnect electrical connector (X205) and remove switchover valve (Y22/6 or Y22/9) from resonance intake manifold    
5 Install in the reverse order    
scientia non olet · About LEMON Manuals