TELE AID operation - GF82.95-P-0001CWU
MODEL 204.0 with CODE (359) TELE AID emergency call system
Function requirements
- Status "circuit 30 ON" or "circuit 15R ON"
- Telematic Alarm Identification on Demand (emergency call system) (TELE AID) system authorized and operating error-free
- Each vehicle-related service is authorized separately
- An emergency call system control unit (N123/4) communication module authorized for the corresponding vehicle-related service is configured ex-factory with the telephone number of the corresponding service provider
- The customer is registered and authorized in the Customer Assistance Center (CAC)
- A mobile telephone network is available in adequate strength and quality
Self-test
Following activation of status "circuit 15R ON" the emergency call system control unit performs a self-test (approx. t = 3.5 s). If the self-test is successful, the TELE AID system is operational.
In the event of a fault or if authorization has not been provided, an error message will be displayed in the instrument cluster (A1) depending on the fault type and the two red light emitting diodes (LED) in the emergency call system button (S93/3) are also permanently actuated. Depending on the fault type, the fault is also stored in the emergency call system control unit's memory.
General
The emergency call system control unit enables the following vehicle-related services to be realized:
- Authorization (Provisioning)
- TELE AID emergency call (E-call), manual or automatic, incl. emergency police assistance number "911"
- MB-Info call
- Breakdown assistance (Roadside Assistance)
- Vehicle tracking
- Vehicle remote door unlock
- Vehicle remote door lock
The emergency call system control unit is not used for regular telephone calls.
The TELE AID system consists of the following subfunctions:
- Voice connection to vehicle
- MB Info
- Display of TELE AID status
- Emergency call
- Vehicle remote unlocking
- Vehicle remote locking
- Position finding
- Breakdown assistance
- Telephone antenna selection
Prioritization supplementary information
All listed vehicle-related services run automatically in the emergency call system control unit. The emergency call system control unit has a priority management feature to ensure that it does not have to manage several vehicle-related services at the same time. This determines the point at which a vehicle-related service is to be activated and which vehicle-related service has a higher priority.
Depending on which vehicle-related service is to be activated, the emergency call system control unit releases resources in accordance with the priority list and activates the vehicle-related service or refuses activation because a vehicle-related service with a higher priority is already active. The highest priority is given to the completion of an automatic TELE AID emergency call.
Priority Service
- Automatic TELE AID emergency call
- Manual TELE AID emergency call
- Vehicle tracking
- Breakdown assistance
- MB information call
- Authorization
- Vehicle remote unlocking
- Vehicle remote locking
| TELE AID position of the components | With code (512) COMAND APS with DVD changer with CODE (810) Sound system With code (389) Mobile phone preinstallation with universal interface, USA/Canada Comfort telephony |
GF82.95-P-0001-01CWU |
| Voice connection to vehicle, function | GF82.95-P-2006CWU | |
| MB information, function | GF82.95-P-2010CWU | |
| Display of TELE AID status, function | GF82.95-P-2015CWU | |
| Emergency call, function | GF82.95-P-2016CWU | |
| Vehicle remote door unlocking, function | GF82.95-P-2018CWU | |
| Vehicle remote door locking, function | GF82.95-P-2019CWU | |
| Breakdown assistance, function | GF82.95-P-2020CWU | |
| Position finding, function | GF82.95-P-3000CWU | |
| Selecting telephone antenna, function | GF82.95-P-3001CWU |