LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2011 >> C350 >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Collision Avoidance And Electrical System - Basic Knowledge - C63/C350 (204) >> Basic Knowledge >> Front SAM control unit with fuse and relay module, component description - GF54.21-P-6070CW

Front SAM control unit with fuse and relay module, component description - GF54.21-P-6070CW

MODEL 204.0/2 up to Model Year 8 

Illustrated on model 204.0 

Fig 1: Locating Front SAM Control Unit With Fuse And Relay Module
G07531176Courtesy of MERCEDES-BENZ USA

Location 

The front SAM control unit is located in the left of the engine compartment.

Task 

The front SAM control unit is connected to the interior CAN, chassis CAN, the front end CAN and the diagnostic CAN for the exchange of data.

Limit switches supply systems and control units with voltage to match the function sequence. Requests are conveyed to the front SAM control unit via the CAN, instrument panel LIN, the wiper/inside rearview mirror LIN or via read-in switches and sensors.

The individual components are protected via fuses contained in the fuse and relay block.

Control of the following systems 

(with code (414) Power glass tilting/sliding sunroof and code (345) rain sensor)

Gateway between the following LINs 

Central gateway between the following CANs 

Discrete inputs 

Discrete outputs 

(with code (581) Comfort automatic air conditioning and with code (954) Avantgarde or with code (955) Elegance)

There is a connection to the following components via the local interconnect network (LIN): 

Switching the following relays 

Carrier for the following relays 

Switching consumers using relays