Blind Spot Assist wiring diagram - PE54.71-P-2100-97FAA
MODEL 204.0/2/3 with CODE 234 (Blind Spot Monitoring) with CODE 476 (Automatic lane recognition)
MODEL 204.9 as of model year 2013 with CODE 234 (Blind Spot Monitoring)
with CODE 476 (Automatic lane recognition)
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 15L |
| B29/4 | Left rear bumper intelligent radar sensor | 9L |
| B29/5 | Right rear bumper intelligent radar sensor | 6L |
| CAN G | Front end CAN | 13K |
| N10/1 | Front SAM control unit with fuse and relay module | 13L |
| N10/2 | Rear SAM control unit with fuse and relay module | 3L |
| N10/2f59 | Fuse 59 | 2L |
| W7 | Right wheelhouse trunk ground point | 7B |
| X35/28 | Rear bumper PARKTRONIC electrical connector | 4E |
| Z36/17 | Rear sensor CAN connector sleeve | 10G |
| Z36/19 | Rear sensor CAN connector sleeve | 9G |
| Z36/35 | Rear radar sensors sensor power supply connector sleeve | 5G |
| Z36/36 | Rear radar sensors sensor ground connector sleeve | 7G |