LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2010 >> SLK55 >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle - 171 Chassis >> Testing & Repair >> Remove/install rubber mount on track rod - AR35.20-P-0112-01P

Remove/install rubber mount on track rod - AR35.20-P-0112-01P

Remove 

1  Using extraction and insertion tool (04e, 04f) press rubber mount (4b) out of the tie rod.

Fig 1: Identifying Rubber Mount, Track Rod And Insertion Tool
G04734643

Install 

2  Using the extraction and insertion tool (04e, 04f) press the rubber mount (4b) into the tie rod until the collar of the extraction and insertion tool, upper part (04e) abuts the boss on the tie rod.

Fig 2: Identifying Rubber Mount And Insertion Tool
G04734644
scientia non olet · About LEMON Manuals