Install spare wheel well - AR64.20-P-1245-03V

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1003-02A	Clamping pliers
WH58.30-Z-1031-02A	C-clamp
WH58.30-Z-1038-02A	Manual temporary fastener, dia.6.4 mm - clamping range 0 -15 mm, identification color silver Firma Hausmann GmbH D-34346 Hann. Munden, Germany
WH58.30-Z-1003-29A	Hand riveter

WORKSHOP EQUIPMENT

WE58.40-Z-1001-03A	Drill (electric/pneumatic)
WE58.40-Z-1001-05A	Two-post lifting platform
WE58.40-Z-1003-14A	Blind rivet tool

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1018-07A	Primer spray can with repair kit	A 000 986 32 50
BR00.45-Z-1001-13A	Rivet	A 003 990 35 97

Fig 1: Identifying Areas For Drilling Rivet Holes In Spare Wheel Well

Courtesy of MERCEDES-BENZ USA

1. Install spare wheel well (1) and fit.
2. Fasten spare wheel well (1) with clamping pliers.
3. Drill Ø 6.5 mm rivet holes in spare wheel well (1) (areas A, B, C and D).
4. Remove spare wheel well (1)
5. Deburr rivet holes on both sides
6. Apply primer to inner rivet connections
   Fig 2: Identifying Riveting Areas On Spare Wheel Well

   Courtesy of MERCEDES-BENZ USA
7. Install spare wheel well (1) and fasten with manual temporary fasteners
8. Spare wheel well (1) rivet with Polygrip flat-head rivets Ø 6.4 x 14 mm (areas A, B, C and D).