Online SCN coding - AR54.21-P-0013-01X

NOTE: The following work instructions describe the procedure for the online software calibration number (SCN) coding with Xentry Flash. Precondition for SCN coding: Networked "Star Diagnosis" diagnostic system, User ID and password for "Xentry flash" (user on Aftersales Platform):

Entrance into coding in Xentry Diagnostics (XD)

Select control unit.
Select menu item "control unit adaptations" or "initial startup".
Select menu item "SCN coding".
Select "Online (networked STAR DIAGNOSIS device)" menu item.
Enter user ID and password into the login screen. Continue with "Log in".
NOTE: After logging in the SCN coding data are automatically queried in the background and the control unit is then coded.
Print out order log and enclose repair order.
NOTE: The job report can also be stored on the diagnostic system. This is done via the print menu Print to file". In "StarUtilities", the "StarPad" program can be used to display and printout the job reports at the "Logs" menu item. The SCN coding of the control unit is completed.