LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2010 >> SLK350 Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Doors & Windows - 171 Chassis >> Basic Knowledge - From 2009 >> Left door control unit, component description - GF72.29-P-4124RC

Left door control unit, component description - GF72.29-P-4124RC

MODEL 171.4 as of model year 09 /YoM 08 model refinement package 

Location  The left door control unit is located on the door module of the left door behind the door panel.

Fig 1: Locating Left Door Control Module
G00541341Courtesy of MERCEDES-BENZ USA

Task:  The left door control unit has the following tasks: Reading in of sensors, pickups and signals, Evaluation of input factors, Actuation of components. Reading in of sensors, pickups and signals:  The input factors are read in with the following connections: Direct line, Interior CAN 

Interior CAN  The signals from the following control points of the upper control panel control unit (N72/1) are read in via interior CAN: - Outside mirror adjustment switch with/without mirror fold-in/out feature (S50/1) Outside mirror adjustment up/down, in/out toggle switch (S50/1s1) - Folding outside mirror in/out switch (S50/1s3) (with code (500) Left/right folding outside mirror) - Left outside mirror adjustment selection switch (S50/1s6) - Right outside mirror adjustment selection switch (S50/1s7).

Evaluation of input factors:  The input factors that have been read in are evaluated by the integrated microprocessor and the affected components are then actuated.

The left door control unit supplies the connected controls with power from circuit 58d.

Interior CAN  The following signals are transmitted via interior CAN: - Actuations to adjust passenger side power window motor (PW) - Requests to adjust the right electrically adjustable and heated outside mirror (M21/2) - Status of driver-side power window to convertible top mechanism control unit (N52) to release rear side window adjustment.

Direct line  The following switches and sensors are read in directly via a direct line: Left IR receiver unit (A26/1) (with code (880) Closing system with infrared remote control) Hall sensors of left front power window motor (M10/3) Mirror adjustment up/down potentiometer (M21/1r2) (with code (275) Driver seat, steering column and electrically adjustable outside mirror with memory) Mirror adjustment in/out potentiometer (M21/1r3) (with code (275) Driver seat, steering column and electrically adjustable outside mirror with memory) Driver-side power window switch group (S20/1) - Left power window switch (S20/1s1) - Right power window switch (S20/1s2)

Actuation of components  Components are actuated with the following lines: Direct line Interior CAN

Direct line  The following components are actuated via a direct line: - Entrance and exit lamp in left door (E17/3) - Left outside mirror turn signal lamp (E6/5) - Left front power window motor (M10/3) - Left front door central locking motor (M14/6) - Left electrically adjustable and heated outside mirror (M21/1) - Automatic dimming mirror (M21/1h1) (for code (249) Automatically dimming inside rearview mirror and outside mirror (driver)) - Mirror adjustment up/down motor (M21/1m1) - Mirror adjustment up/out motor (M21/1m2) - Power folding mirror (M21/1m3) (with code (500) Left/right folding outside mirror) - Mirror heater (M21/1r1).