Remove/install yaw rate and lateral acceleration sensor - AR42.45-P-0841R
MODEL 230
| Fig. Item, etc. | Work instructions | ||
|---|---|---|---|
| 1 | Remove rear luggage box | Right side | |
| Model 230 up to 14.1.04 | AR68.30-P-7440R | ||
| Model 230 as of 15.1.04 | AR68.30-P-7440RA | ||
| 2 | Disconnect electrical connector on sensor (B24/15) | ||
| 3 | Detach sensor (B24/15) from retaining plate (3) | Observe correct installation position. The sensor (B24/15) is sensitive to shock. | |
| 4 | Install in the reverse order | ||
| 5 | Carry out road test as per STAR DIAGNOSIS | After replacing the sensor (B24/15) | |
| 6 | Perform initialization of DTR control unit with STAR DIAGNOSIS | After replacing sensor (B24/15) on vehicles with code (219) Distronic (DTR) |