Checking rear axle camber - AR40.20-P-0331R
MODEL 230.467 /474 /475 /476 /479
| Checking | |||
|---|---|---|---|
| 1 | Checking rear axle camber | If substantial deviations in the rear axle camber are found, the cause may be one of the following:
Camber at vehicle level: |
|
| Model 230.467 with Active Body Control (ABC), code 487 Models 230.474 /475 /476 /479 |
*BE40.20-P-1001-09K | ||
| Model 230.467 without Active Body Control (ABC), code 487 Observe permissible difference in rear axle camber between right and left sides of the vehicle. |
*BE40.20-P-1001-09KK | ||
| Model 230.467 with Active Body Control (ABC), code 487 Models 230.474 /475 /476 /479 |
*BE40.20-P-1002-09K | ||
| Model 230.467 without Active Body Control (ABC), code 487 | *BE40.20-P-1002-09KK |
TEST VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 230 with Active Body Control (code 487) | ||
|---|---|---|---|---|
| BE40.20-P-1001-09K | Camber at vehicle level | +1.4° | ∠° | -1° 09' (± 30') |
| +0.6° | ∠° | -1° 19' (± 30') | ||
| -0.2° | ∠° | -1° 29' (± 30') | ||
| -1.0° | ∠° | -1° 39' (± 30') | ||
| -1.9° | ∠° | -1° 50' (± 30') | ||
| -2.6° | ∠° | -2° 01' (± 30') | ||
| -3.4° | ∠° | -2° 12' (± 30') | ||
| BE40.20-P-1002-09K | Permissible rear axle camber between right and left vehicle side | ∠° | 30' | |
TEST VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 230 without Active Body Control (code 487) | ||
|---|---|---|---|---|
| BE40.20-P-1001-09KK | Camber at vehicle level | +1.4° | ∠° | 1° 10'(± 30') |
| +1.2° | ∠° | 1° 12'(± 30') | ||
| +1.0° | ∠° | 1° 14'(± 30') | ||
| +0.8° | ∠° | 1° 17'(± 30') | ||
| +0.6° | ∠° | 1° 19'(± 30') | ||
| +0.4° | ∠° | 1° 22'(± 30') | ||
| +0.2° | ∠° | 1° 24'(± 30') | ||
| 0.0° | ∠° | 1° 26'(± 30') | ||
| -0.2° | ∠° | 1° 29'(± 30') | ||
| -0.4° | ∠° | 1° 32'(± 30') | ||
| -0.6° | ∠° | 1° 34'(± 30') | ||
| -0.8° | ∠° | 1° 37'(± 30') | ||
| -1.0° | ∠° | 1° 40'(± 30') | ||
| BE40.20-P-1002-09KK | Permissible rear axle camber between right and left vehicle side | ∠° | 30' | |