Attaching Mercedes-Benz quick-clamping devices - AR40.20-P-0230I

MODEL 209, 211, 215, 219, 220, 230, 240 

Shows model 220 

Fig 1: Identifying Mercedes-Benz Quick-Clamping Devices - Shows Model 220

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Mercedes-Benz Quick-Clamping Devices

Courtesy of MERCEDES-BENZ USA

	Installing, removing
1	Attach quick-clamping devices to front and rear axles and remove clamp handles	The mounting bell is centered on the front wheel hub or rear axle shaft flange by locating the tracer pins in the five mounting holes (arrows) in the rim. Check quick-clamping devices, wheel mirrors and measurement sensors at regular intervals in accordance with the manufacturer's instructions
		Quick-clamping device	Fig 3
2	Attach wheel mirrors or measurement sensors
3	Remove in reverse order

Fig 3: Identifying Quick Clamping Device (124 589 01 31 00)

Courtesy of MERCEDES-BENZ USA