Retrofit AMG light alloy wheels - AZ40.10-P-0003I

MODEL 230

Combination 1

AMG spoke wheel Styling IV multipiece

Front axle: 8.5J x19 EH2 ET 25 (B6 603 1092) with 255/35 ZR 19 96Y Extra Load tires

Rear axle: 10J x19 EH2 ET 28 (B6 603 1093) with 285/30 ZR19 98Y Extra Load tires

Fig 1: Identifying AMG Light Alloy Wheels - Styling IV (Multipiece)

Combination 2

AMG spoke wheel Styling IV multipiece

Front axle: 8.5J x19 EH2 ET 30 (B6 603 1360 or B6 603 1369) with tires 255/35 ZR 19 96Y Extra Load

Rear axle: 9.5J _19 EH2 ET 31 (B6 603 1361 or B6 603 1370) with tires 285/30 ZR19 98Y Extra Load

Fig 2: Identifying AMG Light Alloy Wheels - Styling IV (Multipiece)

Combination 3

AMG spoke wheel Styling III single-piece

Front axle: 8.5J x19 H2 ET 34 (B6 603 1226) with 255/35 ZR 19 96Y Extra Load tires

Rear axle: 9.5J x19 H2 ET 31 (B6 603 1227) with 285/30 ZR19 98Y Extra Load tires

Fig 3: Identifying AMG Spoke Wheel Styling III Single-Piece

Combination 4

AMG spoke wheel Styling III single-piece

Front axle: 8.5J x19 H2 ET 25 (B6 603 1230) with tires 255/35 ZR 19 96Y Extra Load

Rear axle: 9.5J x19 H2 ET 28 (B6 603 1231) with tires 285/30 ZR19 98Y Extra Load

Fig 4: Identifying AMG Spoked Wheel Styling III Single-Piece

Combination 5

AMG spoke wheel Styling III single-piece

Front axle: 8.5J x19 H2 ET 30 (B6 603 1232) with tires 255/35 ZR 19 96Y Extra Load

Rear axle: 9.5J x19 H2 ET 31 (B6 603 1233) with tires 285/30 ZR19 98Y Extra Load

Fig 5: Identifying AMG Spoked Wheel Styling III Single-Piece

	A condition for using the wheel/tire combination is that the work described is carried out in full.	In the Federal Republic of Germany after the modification, a change acceptance is required by an officially recognized expert or inspector from a technical test point for motor vehicle traffic or by a test engineer from an officially recognized supervisory organization.
	Tire approval certification	Model 230.456/ 467/ 471/ 472/ 474/ 475/ 476 /477 /479. * For Germany only	OF40.10-P-1000-01PB
	Wheel / tire combination / tire make / using snow chains		AZ40.10-P-0001-01K
	Tire inflation pressure	See TUV certificate.
	Remove
1	Removing standard wheels		AZ40.10-P-0001-03B
2	Body retrofitting work at front fender		AZ40.10-P-0001-04E
3	Reworking body at rear wheel houses		AZ40.10-P-0001-10H
	Install
4	Fit special wheels	Only the M14 x1 .5 x4 5 radius seat bolts supplied should be used for combination 3. Only the M14 x1 .5 x2 7 radius seat bolts should be used for the wheel bolted connection for combination 1 and 2 (standard production).	AZ40.10-P-0001-08C

PARTS ORDERING NOTES

Part no.	Designation	Quantity
B6 603 1092	Light alloy disk wheel 8.5J x1 9 EH2 ET 25 with rubber valve and wheel trim cover	2
B6 603 1093	Light alloy disk wheel 10J x1 9 EH2 ET 28 with rubber valve and wheel trim cover	2
A220 400 01 25 9709	Wheel trim cover	as required
A000 400 02 13	Rubber valve	as required
A211 401 03 70	M14 x1 .5 x2 7 wheel bolt (standard production, not included in the parts kit)	as required
B6 603 1360 or B6 603 1369	Light alloy disk wheel 8.5J x1 9 EH2 ET 30 with rubber valve and wheel trim cover	2
B6 603 1361 or B6 603 1370	Light alloy disk wheel 9.5J x1 9 EH2 ET 31 with rubber valve and wheel trim cover	2
A220 400 01 25 9709	Wheel trim cover	as required
A000 400 02 13	Rubber valve	as required
A211 401 03 70	M14 x1 .5 x2 7 wheel bolt (standard production, not included in the parts kit)	as required
B6 603 1226	Light alloy disk wheel 8.5J x1 9 H2 ET 34 with rubber valve and wheel trim cover	2
B6 603 1227	Light alloy disk wheel 9.5J x1 9 H2 ET 31 with rubber valve and wheel trim cover	2
B6 647 0145	M14 x 1.5 x4 5 wheel bolts (included in the parts kit)	as required
A220 400 01 25 9715	Wheel trim cover	as required
A000 400 02 13	Rubber valve	as required
B6 603 1230	Light alloy disk wheel 8.5J x1 9 H2 ET 25 with rubber valve and wheel trim cover	2
B6 603 1231	Light alloy disk wheel 9.5J x1 9 H2 ET 28 with rubber valve and wheel trim cover	2
A220 400 01 25 9709	Wheel trim cover	as required
A000 400 02 13	Rubber valve	as required
A211 401 03 70	M14 x1 .5 x2 7 wheel bolt (standard production, not included in the parts kit)	as required
B6 603 1232	Light alloy disk wheel 8.5J x1 9 H2 ET 30 with rubber valve and wheel trim cover	2
B6 603 1233	Light alloy disk wheel 9.5J x1 9 H2 ET 31 with rubber valve and wheel trim cover	2
A220 400 01 25 9709	Wheel trim cover	as required
A000 400 02 13	Rubber valve	as required
A211 401 03 70	M14 x1 .5 x2 7 wheel bolt (standard production, not included in the parts kit)	as required