Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A: Notes

MODEL 124, 129, 140, 163, 164, 168, 169, 170, 171, 202, 203, 204, 208, 209, 210, 211, 215, 216, 219, 220, 221, 230, 240, 245, 251, 414, 461 as of 1.4.94, 463

Fig 1: Identifying Supplemental Restraint System (SRS) Squib Wiring Harness Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.	AS91.00-Z-0001-01A
	Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect power supply and unplug the SRS test connector (X11/13).	AS91.00-Z-0001-01B
	Risk of injury to skin and eyes caused by handling hot or glowing objects.	Wear safety gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Risk of injury caused by burns to skin and eyes. Risk of poisoning caused by inhaling fumes when working with heat-shrinkable tubing.	Work in well ventilated rooms only. Wear safety glasses with side protection and protective gloves.	AS00.19-Z-0001-01A
	Assessment of airbag and belt tensioner units in accident vehicles	Model 129, 202 up to 30.6.93 Model 124, 126, 140	AH91.00-P-0006-01A
	Notes on replacement of safety-relevant and special components		AH00.19-P-1000-08A
	Assessment of airbag and belt tensioner units in accident vehicles	Model 129 as of 1.7.93, 163, 164, 168, 169, 170, 171, 202 as of 1.7.93, 203, 204, 208, 209, 210, 211, 215, 216, 219, 220, 221, 230, 240, 245, 251, 414, 461 as of 1.4.94, 463	AH91.00-P-0006-01B
	Notes on cable protection		AH00.19-P-1000-11A
1	Remove detachable body components in area to be repaired
2	Repairing wiring harness using solder connectors		AR00.19-P-0100-09A
		Wiring harness repair kit, basic	Fig 3
		New passenger vehicle wiring harness repair kit	Fig 2
		Wire stripper	Fig 5
		Reflector	Fig 4
		Adapter	Fig 6
		Welding bead catcher	Fig 9
		Heat gun, see GOTIS http://gotis.aftersales.daimlerchrysler.com
3	Protect the repair area after cable repairs		AR00.19-P-0100-08A
4	Checking wiring harness	Function check on completion of repair.	AR54.18-P-0600-01A
		Electrical connection set	Figure
		126-pin socket box	Figure
5	Install in the reverse order