Remove/install SAM control unit with fuse and relay box, right front - AR54.21-P-1261R
MODEL 230.4
| Remove/install | |||
|---|---|---|---|
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| The installation position of the individual electrical connectors is specified by the colored and construction coding | |||
| 1 | Buffer basic data of the passenger-side SAM control unit (N10/11) with passenger-side fuse and relay module (K40/4) in STAR DIAGNOSIS | When replacing the passenger-side SAM control unit (N10/11) with passenger-side fuse and relay module (K40/4). | |
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| STAR DIAGNOSIS system | *WH58.30-Z-1048-13A | ||
| 2 | Remove starter battery | AR54.10-P-0005RB | |
| 3 | Open lock (1) and remove cover (2) | ||
| 4 | Disconnect electrical connectors (3) from passenger-side fuse and relay module (K40/4) | ||
| 5 | Unlock passenger-side SAM control unit (N10/11) with passenger-side fuse and relay module (K40/4) to the side (arrow) and pull upwards out of the guides of the fuse and relay box until the fuse holder (4) can be unlocked | ||
| 6 | Unlock and remove fuse holder (4) | ||
| 7 | Pull passenger-side SAM control unit (N10/11) with passenger-side fuse and relay module (K40/4) out upwards until the electrical connectors (5, 6) are accessible | ||
| 8 | Disconnect the electrical connectors (5) first, then the electrical connectors (6) | ||
| 9 | Open clamp lever (7) in the direction of the arrow and remove electrical line (8) (arrow) | ||
| 10 | Remove passenger-side SAM control unit (N10/11) with passenger-side fuse and relay module (K40/4) | ||
| 11 | Install in the reverse order |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation | |
|---|---|---|
| WH58.30-Z-1048-13A | STAR DIAGNOSIS system, Compact Passenger Car | 6511 1801 00 |