Remove/install 12 Volt socket - AR54.10-P-1000TX

MODEL 168, 169, 170, 171, 203, 208, 209, 210, 211, 219, 245 

MODEL 230 without CODE (P99) "AMG Black Series" special model 

Illustrated on model 219 

Fig 1: Identifying 12 Volt Socket Components - Illustrated On Model 219

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition
2	Open flap (1) of interior socket (X58/1)
3	Unlock the interior socket (X58/1) with the pliers (2) and pull out until the electrical connector (3) is accessible	The spigots of the pliers (2) must engage in the cutouts of the housing (arrows).
			Figure
4	Separate the electrical connector (3) and remove the interior socket (X58/1)	Installation:  Pay attention to the correct installation position of the interior socket (X58/1).
5	Install in the reverse order

Fig 2: Identifying Pliers (169 589 00 37 00)

Courtesy of MERCEDES-BENZ USA