Secure vehicle on lifting platform - AR00.60-P-0100SX

MODEL 221.0 /1 

MODEL 216 

Fig 1: Identifying Lifting Platform Components

Courtesy of MERCEDES-BENZ USA

	Mount/dismantle
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
1	Remove plastic screws (2) of lifting platform supports (1)
2	Pry lifting platform supports (1) out of longitudinal members
3	Insert lifting platform safety devices (01) into longitudinal members	The lifting platform safety devices (01) must always be mounted in pairs i.e. at two positions in the vehicle's longitudinal members. Lifting platform safety devices (01) can be mounted at the front, at the rear or on one side as pairs.
			Figure
4	Swivel lever (01a) of lifting platform safety devices (01) to the right	Thus, the lifting platform safety devices (01) are locked onto the longitudinal members.
5	Adjust support plate (4) of lifting platform support arm (3) until it is level with the lifting platform safety devices (01) or the remaining lifting platform supports (1)	Rotate support plates (4) until they make contact with the lifting platform safety devices (01) or the lifting platform supports (1) of the longitudinal members.
6	Raise vehicle with lifting platform		AR00.60-P-1000SX
7	Secure lifting platform safety devices (01) using tensioning straps on the lifting platform support arms (3)
8	Dismantle in reverse order.

Fig 2: Identifying Lifting Platform Retainer (171 589 01 31 00)

Courtesy of MERCEDES-BENZ USA