LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2010 >> S65 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine -- General Information -- S-Class (221) >> General Information >> Notes on sealant path for oil pan - AH01.45-P-0001-01SY

Notes on sealant path for oil pan - AH01.45-P-0001-01SY

Application of sealant to oil pan bottom section for engine with front sump 

IMPORTANT The line (1) identifies the sealant run.

IMPORTANT The sealing surface must be cleaned. The sealant must only be applied to the specified surface in the form of a bead and a height and width of 2.0 mm (±0.5 mm).

The sealant must be applied within 10 min. The sealant bead must not be spread. Only sealant listed in the Repair Products may be used.

Fig 1: Identifying Sealant Application Areas On Oil Pan Bottom Section For Engine With Front Sump
G07590002Courtesy of MERCEDES-BENZ USA

Application of sealant to oil pan bottom section for engine with middle sump 

Fig 2: Identifying Sealant Application Areas On Oil Pan Bottom Section For Engine With Middle Sump
G07590003Courtesy of MERCEDES-BENZ USA

Application of sealant to oil pan bottom section for engine with rear sump 

Fig 3: Identifying Sealant Application Areas On Oil Pan Bottom Section For Engine With Rear Sump
G07590004Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals