Remove/install center console paneling - AR68.20-P-5169SX

MODEL 221.0 /1 Rear paneling 

Shown with code (582) Rear air conditioning 

Fig 1: Identifying Center Console Paneling Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Manually unclip paneling (11) toward rear from center console (2) (arrows A), tilt downward and remove from center console (2).	Installation:  Insert paneling (1) from bottom into mounts (arrows B) on center console, tilt upward and clip into center console (2).
2	Disconnect electrical connector (3) from rear center nozzle potentiometer.
3.1	Disconnect electrical connector on rear air conditioning control unit (N22/4)	On vehicles with code (582) Rear air conditioning
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
4.1	Remove rear air nozzle (4) from paneling (1).	When replacing paneling (1). Rechargeable drill/screwdriver	*WH58.30-Z-1007-20A
5.1	Remove stowage compartment or rear air conditioning control unit (N22/4) from paneling (1).	When replacing paneling (1). Remove rear AC control unit (N22/4) on vehicles with code (582) Rear air conditioning, see: ↓
		Remove and install rear air conditioning control and operating unit	AR83.50-P-9070SX
6	Install in the reverse order