Remove/install water repellent over wiper system - AR83.25-P-1406GZ

MODEL 164 

Fig 1: Identifying Water Repellent Over Wiper System Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
	Risk of injury  in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism	Always remove ignition key when working on windshield wiper mechanism.	AS82.30-Z-0001-01A
1	Remove wiper arms		AR82.30-P-6100GZ
2	Detach rubber seal (1) from cover (5)
3	Detach rubber seal (2) from left and right fender
4	Unclip washer fluid hose from clip (4)
5	Remove cover (5)	Detach cover (5) on one side in the opposite direction. Installation:  Lubricate upper edge of cover (5) and windshield at bottom with soapy water.
6	Install in the reverse order