Remove/install loudspeakers in rear doors - AR82.62-P-7874GZ

MODEL 164 

Fig 1: Identifying Rear Door Speaker, Electrical Connector, Door Module And Rivets

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
	Switch off radio
1	Remove door lining from left or right rear door		AR72.12-P-1010GZ
2	Detach electrical connector (2) from left rear door speaker (H4/3) or right rear door speaker (H4/4)
3	Drill out rivets (3) with a dia. 4.8 mm drill bit	Remaining rivet material must be completely removed, otherwise this can cause corrosion damage. Use aluminum/steel hollow rivets, dia. 4.8 x 15 mm
		Hand riveter	*WH58.30-Z-1003-29A
		Cordless drill/driver	*WH58.30-Z-1007-20A
		Wet/dry vacuum cleaner	*WE58.40-Z-1005-03A
4	Remove left rear door speaker (H4/3) or right rear door speaker (H4/4) from door module (1)
5	Install in the reverse order

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1007-20A	Cordless drill/driver
WH58.30-Z-1003-29A	Hand riveter

WORKSHOP EQUIPMENT

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner