LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2010 >> GLK350 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Complete Engine - General Information) >> General Information >> Notes on application of sealant to end cover with radial shaft seal >> Notes on application of sealant to end cover with radial shaft seal - AH01.40-P-1000-06C

Notes on application of sealant to end cover with radial shaft seal - AH01.40-P-1000-06C

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 166.940/960/961/990/991/995, 668.914/940/941/942 

Sealant application on end cover 

Clean sealing surfaces and apply sealant only to the specified areas in a bead measuring 2.0 mm 0.5 mm. (See illustration below)

IMPORTANT The sealant must be applied within 10 minutes.

Fig 1: Identifying End Cover Sealant Applying Area With Radial Shaft Seal
G10037313Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals