Rear axle shaft - BA35.30-P-1000-01A
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 129, 140, 170, 171, 202, 203, 208, 209, 210, 215, 220, 240
REAR AXLE SHAFT
| Number | Designation | MODEL 129 | MODEL 170 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | - | - |
| not self-locking | Nm | 220 | 220 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | 70 | 70 |
| M12 | Nm | 100 | - | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 140 without special protection | MODEL 140 with special protection | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | 350 | - |
| not self-locking | Nm | 320 | 390 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | 70 | - |
| M12 | Nm | 100 | 100 | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 171 | MODEL 202 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | - | - |
| not self-locking | Nm | 220 | 220 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | - | 70 |
| M12 | Nm | - | - | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 203 | MODEL 208 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | - | - |
| not self-locking | Nm | 220 | 220 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | 70 | 70 |
| M12 | Nm | - | - | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 209 (except 209.377/477) except CODE P98 | MODEL 209.377/477 with CODE P98 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | - | 350 |
| not self-locking | Nm | 220 | 320 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | - | - |
| M12 | Nm | - | - | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 210.0 without special protection | MODEL 210.0 with special protection | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | - | 350 |
| not self-locking | Nm | 220 | 320 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | 70 | 70 |
| M12 | Nm | - | 100 | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 210.2/6 | MODEL 215 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | 350 | 350 |
| not self-locking | Nm | 320 | 320 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | 70 | 70 |
| M12 | Nm | - | 100 | ||
REAR AXLE SHAFT
| Number | Designation | MODEL 220 | MODEL 240 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-01A | Collar nut from rear axle shaft to rear axle shaft flange | self-locking | Nm | 350 | - |
| not self-locking | Nm | 320 | 470 | ||
| BA35.30-P-1002-01A | Self-locking bolt, rear axle shaft to connecting flange (thread and bolt head contact surface oiled) | M10 | Nm | 70 | - |
| M12 | Nm | 100 | 100 | ||