Assess condition of brake linings - AP42.10-P-4252SC
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 216
| Check | |||
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Notes on repairs to brake system | AH42.00-P-0003-01A | ||
| 1 | Assess lining thickness (1) of brake pads on front axle | ||
| Brake pad thickness If, in exceptional cases, assessment by means of visual inspection is not possible, ↓ remove wheels to conduct assessment, subject to separate repair order. |
BE42.10-P-1001-05K | ||
| 2 | Assess lining thickness (1) of brake pads on rear axle | ||
| Brake pad thickness If, in exceptional cases, assessment by means of visual inspection is not possible, ↓ remove wheels to conduct assessment, subject to separate repair order. |
BE42.10-P-1001-15J | ||
| 3 | Determine likely remaining distance of brake linings | AP42.10-P-4253-03EW | |
In order to avoid an unscheduled workshop visit between services, it is necessary to determine the remaining distance of the present brake linings. If the remaining distance determined is smaller than the next service interval, premature brake pad replacement should be recommended to the customer. |
CHECK VALUES FOR FRONT BRAKE SHOE
| Number | Designation | MODEL 216.371, MODEL 216.376 with CODE 494, 498, 625 | MODEL 216.376 except CODE 494, 498, 625 | ||
|---|---|---|---|---|---|
| BE42.10-P-1001-05K | Brake pad thickness | new (with pad backing plate) | mm | 17 | 16, 75 |
| Wear limit (without pad backing plate) | mm | 2 | 2 | ||
| Wear limit (with pad backing plate) for maintenance service | mm | 10 | 10, 1 | ||
| Wear limit (without pad backing plate) for maintenance service | mm | 5 | 4, 6 | ||
| Wear indicator activated | mm | 2...3 | 2...3 | ||
CHECK VALUES FOR FRONT BRAKE SHOE
| Number | Designation | MODEL 216.377 | MODEL 216.379 | ||
|---|---|---|---|---|---|
| BE42.10-P-1001-05K | Brake pad thickness | new (with pad backing plate) | mm | 16 | 16 |
| Wear limit (without pad backing plate) | mm | 2 | 2 | ||
| Wear limit (with pad backing plate) for maintenance service | mm | 9, 5 | 9, 5 | ||
| Wear limit (without pad backing plate) for maintenance service | mm | 4, 5 | 4, 5 | ||
| Wear indicator activated | mm | 2...3 | 2...3 | ||
CHECK VALUES FOR REAR BRAKE PAD
| Number | Designation | MODEL 216.371, MODEL 216.376 with floating brake caliper | MODEL 216.376 with fixed brake caliper | ||
|---|---|---|---|---|---|
| BE42.10-P-1001-15J | Brake pad thickness | new (with pad backing plate) | mm | 16 | 15 |
| Wear limit (without pad backing plate) | mm | 2 | 2, 5 | ||
| Wear limit (with pad backing plate) for maintenance service | mm | 9, 5 | 8, 5 | ||
| Wear limit (without pad backing plate) for maintenance service | mm | 4, 5 | 4 | ||
| Wear indicator activated (if available) | mm | - | - | ||
CHECK VALUES FOR REAR BRAKE PAD
| Number | Designation | MODEL 216.377 | MODEL 216.379 | ||
|---|---|---|---|---|---|
| BE42.10-P-1001-15J | Brake pad thickness | new (with pad backing plate) | mm | 16, 5 | 16, 5 |
| Wear limit (without pad backing plate) | mm | 2 | 2 | ||
| Wear limit (with pad backing plate) for maintenance service | mm | 10 | 10 | ||
| Wear limit (without pad backing plate) for maintenance service | mm | 4, 5 | 4, 5 | ||
| Wear indicator activated (if available) | mm | - | - | ||