Assess condition of brake linings - AP42.10-P-4252EW
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Notes on repairs to brake system | AH42.00-P-0003-01A | ||
| Notes on handling, transport and storage of ceramic brake disks | AH42.10-P-9406-13A | ||
| Check | |||
| 1 | Assess lining thickness (1) of brake linings on front axle | ||
| Brake lining thickness - front axle If, in exceptional cases, assessment by means of visual inspection is not possible: ↓ Detach wheel and tire assemblies and inspect them, subject to separate repair order. |
*BE42.10-P-1001-05P | ||
| 2 | Assess lining thickness (1) of brake linings on rear axle | ||
| Brake lining thickness - rear axle If, in exceptional cases, assessment by means of visual inspection is not possible: ↓ Detach wheel and tire assemblies and inspect them, subject to separate repair order. |
*BE42.10-P-1001-15P | ||
| 3 | Determine likely remaining distance of brake linings | AP42.10-P-4253-03EW | |
If the wear limit for the brake linings is reached, the brake linings must be replaced subject to separate repair order. Otherwise the braking effect may be impaired and people, property and environmental damage may result! In order to avoid an unscheduled workshop visit between services, it is necessary to determine the remaining distance of the present brake linings. If the remaining distance determined is smaller than the next service interval, premature brake pad replacement should be recommended to the customer. |
CHECK VALUES FOR FRONT BRAKE LINING
| Number | Designation | MODEL 212.065/067/165/167/168/265/267 except CODE 460/494, MODEL 212.072/090/272 except CODE 494, MODEL 212.093/094/095/293/294 with CODE 950/P96, MODEL 212.061/073/091/099/195/261/273/291/299 | MODEL 212.001/002/004/005/006/034/036/040/041/048/052/201/202/205/206/234/248 with CODE 950/P96, MODEL 212.003 except CODE 1U9, MODEL 212.065/067/165/167/168/265/267 with CODE 460/494, MODEL 212.093/094/095/293/294 except CODE 950/P96, MODEL 212.011/02/047/053/054/055/056/057/059/08/097/098/13/147/148/154/162/203/204/211/22/236/247/25/28/297/298 | ||
|---|---|---|---|---|---|
| BE42.10-P-1001-05P | Brake lining | Brake lining, new | mm | 11, 30 | 12, 80 |
| Pad backing plate | mm | 5, 00 | 5, 50 | ||
| Wear limit | mm | 2, 00 | 2, 00 | ||
| Activation of wear indicator (if installed) | mm | 2...3 | 2...3 | ||
CHECK VALUES FOR FRONT BRAKE LINING
| Number | Designation | MODEL 212.001/002/004/005/006/034/036/040/041/048/052/201/202/205/206/234/248 except CODE 950/P96, MODEL 212.003 with CODE 1U9, MODEL 212.035 | MODEL 212.074/075/076/077/092/274/275/276/277/292 except CODE B07 | ||
|---|---|---|---|---|---|
| BE42.10-P-1001-05P | Brake lining | Brake lining, new | mm | 14, 00 | 9, 75 |
| Pad backing plate | mm | 5, 50 | 6, 00 | ||
| Wear limit | mm | 2, 00 | 2, 00 | ||
| Activation of wear indicator (if installed) | mm | 2...3 | 2...3 | ||
CHECK VALUES FOR FRONT BRAKE LINING
| Number | Designation | MODEL 212.074/075/076/077/092/274/275/276/277/292 with CODE B07 | MODEL 212.072/090/272 with CODE 494 | ||
|---|---|---|---|---|---|
| BE42.10-P-1001-05P | Brake lining | Brake lining, new | mm | 10, 50 | 12, 00 |
| Pad backing plate | mm | 6, 00 | 5, 00 | ||
| Wear limit | mm | 2, 00 | 2, 00 | ||
| Activation of wear indicator (if installed) | mm | 2...3 | 2...3 | ||
CHECK VALUES FOR REAR BRAKE PAD
| Number | Designation | MODEL 212 except AMG | MODEL 212 AMG | ||
|---|---|---|---|---|---|
| BE42.10-P-1001-15P | Brake pad | Brake pad, new | mm | 11, 0 | 9, 1 |
| Pad backing plate | mm | 5 | 5, 5 | ||
| Wear limit | mm | 2, 0 | 2, 0 | ||
| Brake wear indicator activated (if installed) | mm | 2...3 | 2...3 | ||