LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2010 >> GLK350 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Brakes - Hydraulic & Mechanical System - Maintenance - 1 Of 2) >> Maintenance >> Assess Condition Of Brake Linings >> Assess condition of brake linings - AP42.10-P-4252CA

Assess condition of brake linings - AP42.10-P-4252CA

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

Model 207 

MODIFICATION NOTES

9.6.15 Updated Basic Information Brake Pad Front Axle   BE42.10-P-1001-05L
Fig 1: Checking Linings Thickness
G10038000Courtesy of MERCEDES-BENZ USA
Fig 2: Identifying Lining Thickness, Flashlight & Mirror
G10038001Courtesy of MERCEDES-BENZ USA
INSPECT Check     
DANGER Risk of injury  . Skin or eye injuries may result when handling hot or glowing objects. Wear protective gloves, protective clothing and safety glasses, if necessary. AS00.00-Z-0002-01A
DANGER Risk of death  caused by vehicle slipping or toppling off of the lifting platform. Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. AS00.00-Z-0010-01A
NOTES Notes on repairs to brake system   AH42.00-P-0003-01A
1 Assess lining thickness (1) of brake linings on front axle IMPORTANT If necessary, use flashlight (2) or mirror (3). The thickness of the pad backing plate can be used as a guide when assessing lining thickness (1).  
Front axle Brake lining
If, in exceptional cases, assessment by means of visual inspection is not possible:
↓
Detach wheel and tire assemblies and inspect them, subject to separate repair order.
*BE42.10-P-1001-05L 
2 Assess lining thickness (1) of brake linings on rear axle IMPORTANT If necessary, use flashlight (2) or mirror (3). The thickness of the pad backing plate can be used as a guide when assessing lining thickness (1).  
Rear axle Brake pad
If, in exceptional cases, assessment by means of visual inspection is not possible:
↓
Detach wheel and tire assemblies and inspect them, subject to separate repair order.
*BE42.10-P-1001-15K 
3 Determine likely remaining distance of brake linings   AP42.10-P-4253-03EW
NOTES
If the wear limit for the brake linings is reached, the brake linings must be replaced subject to separate repair order.
Otherwise the braking effect may be impaired and people, property and environmental damage may result!
IMPORTANT Per axle, the brake pad with the least lining thickness (1) is to be used for determining the likely remaining distance. In order to avoid an unscheduled workshop visit between services, it is necessary to determine the remaining distance of the present brake linings. If the remaining distance determined is smaller than the next service interval, premature brake pad replacement should be recommended to the customer.
CHECK VALUES FOR FRONT BRAKE LINING

Number Designation Model 207.301/302/347/348/401/402/447/448 with code 950 (AMG Sports package) Model 207.301/302/347/348/401/402/447/448 with code P96 (Sports Package - exterior) Model 207.303/304/32/336/35/361/362/365/367/372/388/403/404/42/436/45/46/472 Model 207.301/302/347/348/401/402/447/448 except code 950 (AMG Sports package) except code P96 (Sports Package - exterior) Model 207.334/434
BE42.10-P-1001-05L Brake lining Brake lining, new mm 12, 5 14, 0
Pad backing plate mm 5, 5 5, 5
Wear limit mm 2, 0 2, 0
Brake wear indicator activated (if installed) mm 2...3 2...3
CHECK VALUES FOR FRONT BRAKE LINING

Number Designation Model 207.373/473
BE42.10-P-1001-05L Brake lining Brake lining, new mm 12, 5
Pad backing plate mm 6, 0
Wear limit mm 2, 0
Brake wear indicator activated (if installed) mm 2...3
CHECK VALUES FOR REAR BRAKE PAD

Number Designation Model 207
BE42.10-P-1001-15K Brake pad Brake pad, new mm 12
Pad backing plate mm 5, 0
Wear limit mm 2
Brake wear indicator activated (if installed) mm 2...3