Risk of injury caused by burns to skin and eyes, risk of poisoning caused by inhaling vapors when working with plastics - AS00.00-Z-0001-02A
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
Wear protective gloves and safety glasses. Ensure that the work area is adequately ventilated.
MODEL ALL
Potential risks
Risk of injury
If the temperature is too high when working with plastic, burns may occur at skin and eyes.
Risk of poisoning
When working with plastic, vapors may be generated that lead to symptoms of poisoning such as coughing, headache, dizziness and nausea. Moreover, irritation may occur to the respiratory paths and eyes.
Safety precautions/instructions
- Work only in well ventilated rooms.
- Avoid overheating the plastic.
- Do not inhale the vapors that might be set free.
- Avoid contact with liquefied material.
- Wear safety glasses and protective gloves.
First-aid measures
In case of eye or skin contact:
- Rinse contact area immediately with plenty of cold water.
- Treat affected area like burn wound. Do not remove any burned-in parts yourself.
- Contact physician or medical service.
When vapor is inhaled:
- Take the injured person out into the fresh air immediately.
- Keep the injured person calm and cover with a blanket.
- Contact physician or medical service.
Fire protection measures
Suitable extinguishing agents
- Water mist, general-purpose foam, powder, carbon dioxide