Notes on controlled deployment of airbag, sidebag and emergency tensioning retractor units - AH91.60-P-0611-02P

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 163, 164, 168, 170, 199, 202, 203, 208, 209, 210, 215, 220, 230, 240, 251, 414, 461, 463

The unattached airbag, sidebag, windowbag and emergency tensioning retractor units should, if possible, be deployed in a scrapped vehicle (with doors closed).

Position the unattached airbag, sidebag, windowbag and emergency tensioning retractor units in the footwell with the discharge hole pointing upwards. In exceptional cases - i.e. when there is no suitable vehicle around to use - the airbag, sidebag, windowbag and emergency tensioning retractor units can be placed in a transport container for replacement engines and deployed there (with the cover sealed). The adapter line and the deployment device are to be ordered through the usual replacement part channels.

The 2-pin plug connection becomes damaged when deploying the unattached airbag, sidebag, windowbag and emergency tensioning retractor units. Therefore, the adapter cable must be pulled out of the plug and replaced.