Remove fuse and relay box in rear - AR54.15-P-1261GZ

MODEL 164 

Fig 1: Identifying Fuse And Relay Box In Rear Remove/Install Components - Shown On Model 164.1

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Shown on model 164.1 

	Remove/instal
1	Disconnect battery ground cable		AR54.10-P-0003GZ
2	Remove cover (1) from load compartment side trim
3	Separate electrical connectors (2)	The number of electrical connectors (2) and fuse assignment of the load compartment fuse and relay box (F4) varies depending on the vehicle model and equipment.
4	Disconnect the positive line (3) from the load compartment fuse and relay box (F4)
5	Unclip fuse carrier (5) from the load compartment fuse and relay box (F4)	To do this, press back with catch hooks (arrow). Number of fuse carriers if equipped. Installation Y:  Color coding of fuse carriers varies. Route electric cables without crossing over.
6	Disconnect electrical connectors (2) from the load compartment fuse and relay box (F4)	Installation:  Route electric cables without crossing over.
7	Unclip and pull out load compartment fuse and relay box (F4) from retaining clamps (4)	Pull out until the back of the load compartment fuse and relay box (F4) is accessible.
8	Unlock and detach connector on the back of the load compartment fuse and relay box (F4)	The number of connectors on the back of the load compartment fuse and relay box (F4) varies depending on the vehicle model and equipment.
9	Remove load compartment fuse and relay box (F4)
10	Install in the reverse order
11	Perform basic programming		AR00.19-P-0200GZ