Remove/install loudspeakers in front doors - AR82.62-P-7845GZ

MODEL 164 

Shown on model 164.1 

Fig 1: Identifying Front Door Loudspeaker, Electrical Connector And Rivets

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
	Switch off radio
1	Remove door lining from left or right front door		AR72.10-P-1000GZ
2	Disconnect electrical connector (2) from the left front door speaker (H4/5) or from right front door speaker (H4/6)
3	Drill out rivets (1) with a dia. 4.8 mm drill bit	Remaining rivet material must be completely removed, otherwise this can cause corrosion damage. Use aluminum/steel hollow rivets, dia. 4.8 x 15 mm
		Hand riveter	*WH58.30-Z-1003-29A
		Cordless drill/driver	*WH58.30-Z-1007-20A
		Wet/dry vacuum cleaner	*WE58.40-Z-1005-03A
4	Remove left front door speaker (H4/5) or right front door speaker (H4/6) from door module
5	Install in the reverse order

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1007-20A	Cordless drill/driver
WH58.30-Z-1003-29A	Hand riveter

WORKSHOP EQUIPMENT

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner