Remove/install power module of headlamp range adjustment (HRA) - AR82.10-P-4013TX

MODEL 219.3 with CODE (615) Bi-xenon headlamp unit with integrated cornering lamps 

Shown on the removed right front lamp unit 

Fig 1: Identifying Headlamp Range Adjustment Power Module Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/Install
	Notes on avoiding damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Remove left front lamp unit (E1) or right front lamp unit (E2)		AR82.10-P-4730TX
2	Remove bolts (1)
3	Carefully pry off HRA power module (E1n3, E2n3) from the left front lamp unit (E1) or right front lamp unit (E2) using longitudinal wedge	ensure correct seating of the seal (2) on the HRA power module (E1n3, E2n3).	Fig 2
4	Install in the reverse order

Fig 2: Identifying Longitudinal Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA