LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2010 >> CL65 >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Substructure -- E350 (211.256)) >> Testing & Repair >> Detach/attach lower engine compartment paneling - AR61.20-P-1105T

Detach/attach lower engine compartment paneling - AR61.20-P-1105T

WARNING: This page is about a different car, the 2009 Mercedes-Benz E350 and 2008 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 211 

Fig 1: Identifying Lower Engine Compartment Paneling
G07285605Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
REMOVINGINSTALLING Remove/Install     
DANGER Risk of death  caused by vehicle slipping or toppling off of the lifting platform. Align vehicle between the columns of the lifting platform and position the four support plates below the hoist support points specified by the vehicle manufacturer. AS00.00-Z-0010-01A
1 Raise vehicle with lifting platform   AR00.60-P-1000T
    Two-post lift *WE58.40-Z-1001-05A 
2 Unscrew screws (1) of front engine compartment paneling (2)    
3 Take off front engine compartment paneling (2) IMPORTANT Can be removed separately.  
4 Unscrew screws (1) of middle engine compartment paneling (3)    
5 Take off middle engine compartment paneling (3) IMPORTANT Can be removed separately.  
6 Unscrew screws (1) of rear engine compartment paneling (4)    
7 Take off rear engine compartment paneling (4) IMPORTANT Can be removed separately.  
8 Install in the reverse order    
WORKSHOP EQUIPMENT

WE58.40-Z-1001-05A Two-post lifting platform