LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2010 >> CL65 >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Brakes -- Testing & Repair -- E350 (211.256)) >> Testing & Repair >> Check brake system for leaks - AR42.10-P-0100-01V

Check brake system for leaks - AR42.10-P-0100-01V

WARNING: This page is about a different car, the 2009 Mercedes-Benz E350 and 2008 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.
  1. After bleeding the brake system, press the brake pedal firmly several times in order to bring the brake pads into contact with the brake disks.
  2. Start the engine and press the brake pedal with approx. 200 to 300 N.
  3. Check brake system for leaks.

    IMPORTANT The pressure built up in the brake system must be held without it being possible to depress the brake pedal further.

  4. Check line and hose connections as well as all components of the brake system for leaks.
  5. Check fluid level in brake fluid expansion reservoir; correct if necessary.
scientia non olet · About LEMON Manuals