Upper transverse control arm modified - BT33.20-P-0500-01A
WARNING: This page is about a different car, the 2009 Mercedes-Benz E350 and 2008 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 211 as of 1.2.03
MODEL 230 as of 1.4.03 except CODE (P99) Special model "AMG Black Series"
Modification to top transverse control arm
Phased in as of 02/2003 on model 211 and 04/2003 on model 230 the top transverse control arms are changed over from aluminum die-casting (illustration A) to aluminum sheet metal variant with bolted on upper ball joint (illustration B).
Both variants can be fitted.